Running Bear's October 2026 Coffee Shop
- Thread starter bnsf971
- Start date
ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.
Walmart and Costco are cheaper anyway
Diesel around here is right at that national average you mentioned. So your price must cancel out with California to get us the average.
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)
chadbag
Well-Known Member
Gas around here seems to be about $4.69 or thereabouts. Probably because most of it is trucked in and with high diesel it adds to the cost. It has been bouncing around the last week or two. Got up close to $5 and lower like $4.39.
Walmart and Costco are cheaper anyway
Diesel around here is right at that national average you mentioned. So your price must cancel out with California to get us the average.
chadbag
Well-Known Member
I was listening to this yesterday.
Ramble on!
Texas Hobo
Well Known Hobo
Good morning, all! Not much to report. Walked around the yard and filled an old kitchen trash can with pinecones. Most were either mowed or half eaten by squirrels.
TomO - Good news that Terry is getting out. Recover at home is usually better since you can get comfortable.
STAY SAFE
LATER
TomO - Good news that Terry is getting out. Recover at home is usually better since you can get comfortable.
STAY SAFE
LATER
NYC_George
Well-Known Member
I've been working all morning on packing up all the bush branches for the town to take away this Friday. The only thing left are the dug up roots. Once the roots get bagged up, we install the new fencing and plants grass seed. Swal
RhB Michael
RhB Lokführer
Well, I was only going to give the front and near back yard one more cut for the season. I ended up cutting it all. It wasn't really very thick at all because of the recent weather, but some of it was a bit tall. Especially the Bluegrass. The fescue is all but done for the year.
Even though it wasn't really tall, the fallen leaves made it easy to see where I hadn't yet cut. Made pretty quick work of it too. Done in 40 minutes, front and back.
Heart rate was 102 immediately after coming into the house and now three minutes later is down to 88 and falling. So recovery is still good on the half-dose of Metoprolol without it getting out of hand and racing. Don't feel winded either or I would have stopped. No dizziness or light-headedness either.
So far, so good.
Even though it wasn't really tall, the fallen leaves made it easy to see where I hadn't yet cut. Made pretty quick work of it too. Done in 40 minutes, front and back.
Heart rate was 102 immediately after coming into the house and now three minutes later is down to 88 and falling. So recovery is still good on the half-dose of Metoprolol without it getting out of hand and racing. Don't feel winded either or I would have stopped. No dizziness or light-headedness either.
So far, so good.
DeaconKC
Well-Known Member
TomO great news!
Back is still giving me fits, didn't help the power went out this morning and I had to manually lift the garage door so Lady C could get out. 67 here right now and real pretty. Got heat on the back now that the power is back on.
We start a Mission's Conference at Church tonight, I'm praying the back eases up. Chiropractor's Office is closed today so that's out.
Anyway, you guys have a good day.
Back is still giving me fits, didn't help the power went out this morning and I had to manually lift the garage door so Lady C could get out. 67 here right now and real pretty. Got heat on the back now that the power is back on.
We start a Mission's Conference at Church tonight, I'm praying the back eases up. Chiropractor's Office is closed today so that's out.
Anyway, you guys have a good day.
Attachments
kbkchooch
Verified Human
Growing up with that last name, I could see that one coming from a mile away, and yes my Dad's name was James!
kbkchooch
Verified Human
Tightening a few bolts? So the weatherman is admitting to a few screws loose??
chadbag
Well-Known Member
Speaking of USPS: Over the weekend I ordered something from a company about 30 minutes away from me.
Monday morning, October 19, there was a shipping notification with a USPS tracking number and an estimated delivery for yesterday (October 20). Monday night I did a track of it on usps.com and it showed it was at the main Salt Lake City distribution center, but it said the estimated delivery was for Thursday October 22. Today I tracked it again and it and it said it had arrived in St. Paul MN at 11:03pm on October 20. LOL
Not sure why they're going through St. Paul is necessary to ship a box 30 minutes up I-15 inside Utah...
Monday morning, October 19, there was a shipping notification with a USPS tracking number and an estimated delivery for yesterday (October 20). Monday night I did a track of it on usps.com and it showed it was at the main Salt Lake City distribution center, but it said the estimated delivery was for Thursday October 22. Today I tracked it again and it and it said it had arrived in St. Paul MN at 11:03pm on October 20. LOL
Not sure why they're going through St. Paul is necessary to ship a box 30 minutes up I-15 inside Utah...
chadbag
Well-Known Member
This may be because a huge PHP security hole was found and a huge portion of the Internet is susceptible. I've seen multiple sites offline today all of a sudden, as people scramble to fix it.
Boris
Beach Bum
Then they turned around and upgraded last weekends rain storm into a sub tropical disturbance...running out of time to use up those names.
Kusojiji
RANK AMATEURS OF THE MODEL RAILROAD FORM MEMBER
Good morning all. Temps and humidity are back down, so AC is off, windows are open and fans spinning.
After I installed an ECONAMI decoder in my Kato C44-9W, I found that it jack rabbits out of the hole and starts moving before the sound started ramping. Kinda weird. I couldn't find any info on how to tweak this, so I wrote to Soundtraxx. They are very responsive and wrote a book of things for me to do. I'll be giving that a try later, after my brain wakes up. So far, I give them two thumbs up for customer service.
Since it looks like the winds have died down, I may be able to get some painting done. I'd like to get that done to give the paint some curing time before the peeps show up, if they ever do. I put a bunch on order almost 2 weeks ago and status shows as preparing for shipment still. I may just order another batch from the jungle site. I prefer the stuff from Kato, which I believe is made by Nochs. They look a lot better than the Amazonian Chinese stuff, even though they are tiny and cost about 4 times as much.
Have a good day!
After I installed an ECONAMI decoder in my Kato C44-9W, I found that it jack rabbits out of the hole and starts moving before the sound started ramping. Kinda weird. I couldn't find any info on how to tweak this, so I wrote to Soundtraxx. They are very responsive and wrote a book of things for me to do. I'll be giving that a try later, after my brain wakes up. So far, I give them two thumbs up for customer service.
Since it looks like the winds have died down, I may be able to get some painting done. I'd like to get that done to give the paint some curing time before the peeps show up, if they ever do. I put a bunch on order almost 2 weeks ago and status shows as preparing for shipment still. I may just order another batch from the jungle site. I prefer the stuff from Kato, which I believe is made by Nochs. They look a lot better than the Amazonian Chinese stuff, even though they are tiny and cost about 4 times as much.
Have a good day!
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)