Thanks!Beauty layout ! The new bridge looks awesome !
Thanks!looks incredible
I was suppose to borrow my friends camera to do more videos but he forgot to bring it to work the other day. I’m on vacation now so it’s going to be sometime in January when I’ll be able to borrow again. Might do a video with my phone until then.Don't forget to watch all the videos about this awesome layout
Are the resistors hot or just slightly warm, I've fitted 100+ resistors, none of mine get hot or even warm, I'm using a 16vAC wall wart with a buck to 12vDC.Completed! Very pleased! My only concern is that the 1/2 watt 470 ohm resistors that I used get hot. I’m guessing all my other one do too, I just never noticed.
View attachment 158456View attachment 158457
As far as I know, resistor's shouldn't get hot, you may want to dial it down a touch, 2amp is also a lot of power just for a set of lights, unless your powering all your lights from the same power supply, bulbs/LEDs will be just as bright at 12v, and unless the lights your using are rated at 16v, their unlikely to last very long.They get hot. The power supply I’m using for my lights and signals is a 2 amp ac power supply that I converted to dc. It puts out 16 volt dc
I would still try dialing it down to 12v, if you can, (you could try installing a buck if you can't) last thing you need is burnt out wiring, someone else might have a suggestion as to why your resistors are getting hot, but that's the only reason I can think of.Yes, I have a specific power supply just for lights, signals and a few electric switch machines.