B_Kosanda
Member
Sorry, I have not been posting much in the way of progress reports lately, but I'll show what I've got going on now. These photos are from the rebuilding of my Cascade Subdivision layout. I decided to build the roadbed out of masonite spline. This is (4) 3/16 inch strips of masonite seperated by doubled up spacers cut from the same masonite. The overall spline is roughly two inches wide. After creating a mountain of saw dust, this method is definitely better than using 1x lumber. There's no waste and the spline creates nice curves and tangents.
In the pics you can see some examples of the work in progress. One photo shows my cleaned up Peco #6 switches from the old layout. Everything is glued with Latex Liquid Nails. It holds good and cleans off your hands with water
Bill
In the pics you can see some examples of the work in progress. One photo shows my cleaned up Peco #6 switches from the old layout. Everything is glued with Latex Liquid Nails. It holds good and cleans off your hands with water
Bill