my dcc loco wont respond????

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


Ok guys. I swapped the wires on back on the track plug in and my loco came to life.

Lights work. Bell works. Horn.

But i cant get it to move forward or reverse. What gives?
The numbers move on my nce controller but train stays still

I cant emergency stop train, i cant shut it off unless i cut the power. Its like i have a lil control of it but the controller cant control it all
 
Last edited by a moderator:
Nevermind.

Motley thanks man i got her working. Reset to 8 then got.factory setting back. Now i have full control.

I cannot thank u guys enuf
 


Im not sure if it was that. Or if it was i had to power cycle it, then it reset it self when i unplugged wires.

Thank you very much motley for your patience dealing with me lol
 
joed2323 said:
Im not sure if it was that. Or if it was i had to power cycle it, then it reset it self when i unplugged wires.

Thank you very much motley for your patience dealing with me lol
Click to expand...
I realize this is a reply to older post, but hopefully you can tell me exactly what you did to correct your problem. I am having the same exact issue with my new BLI Big Boy. It ran perfectly on my friends layout, but when I brought it home...nothing!
 
Badger said:
I realize this is a reply to older post, but hopefully you can tell me exactly what you did to correct your problem. I am having the same exact issue with my new BLI Big Boy. It ran perfectly on my friends layout, but when I brought it home...nothing!
Click to expand...
He may not reply. He hasn't been on here in almost 7 years.
 
Thanks for letting me know. The problem is very frustrating! Maybe someone else has had the same thing and will respond.
 
Badger said:
Thanks for letting me know. The problem is very frustrating! Maybe someone else has had the same thing and will respond.
Click to expand...
It probably got assigned a phantom consist when you removed it from the other layout. Try setting cv19 to 0, and see if that helps.
At worst, it won’t hurt.
 
You must log in or register to reply here.




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top