Where can I get good replacement wheels that are about a 1.000 inch axle point xxdepthxx width? I have about 20 pcs of brand new 1.027 inch wide axles but they won't roll in the trucks. They just slide along the track.
Tried searches and all the wheels I found lack dimensions so I can't tell if they will work.
Thanks,
Tom
PS
More new cars, more crappy import parts. :-(
The flanges are only about .014 inches to .018 inches above the wheel main diameter. Worse yet, they have a rounded slope up onto the flange. They constantly derail.
All my other cars are around .024 inches and higher and have a much sharper radius from wheel running surface to the flange.
I can push the three new cars off the track sideways by barely pushing. :-(
Tried searches and all the wheels I found lack dimensions so I can't tell if they will work.
Thanks,
Tom
PS
More new cars, more crappy import parts. :-(
The flanges are only about .014 inches to .018 inches above the wheel main diameter. Worse yet, they have a rounded slope up onto the flange. They constantly derail.
All my other cars are around .024 inches and higher and have a much sharper radius from wheel running surface to the flange.
I can push the three new cars off the track sideways by barely pushing. :-(
Last edited by a moderator: