Saw this Tsunami/sound decoder, but have not seen one like it before, obviously a hard wiring type. Anyone like to comment. e.g. what are the 2 wires at the opposite end for?
I assume that is a standard DCC 9pin side plug on the left. Purple is usually used for speaker, and it looks like it is also a plug so the decoder would not have to be hard wired in.Saw this Tsunami/sound decoder, but have not seen one like it before, obviously a hard wiring type. Anyone like to comment. e.g. what are the 2 wires at the opposite end for?
I assume that is a standard DCC 9pin side plug on the left. Purple is usually used for speaker, and it looks like it is also a plug so the decoder would not have to be hard wired in.
I was puzzled by the picture too at first. Then I realized that one of the wires (the one on the bottom) is a shadow. Orange is third from the top, next to the red (second from the top). Remember that standard DCC plugs can be reversed without damage, so the grey has to be third from the bottom and the black 2nd from the bottom. White - accessory common is dead center.It's a bit of a vague picture, couldn't see an orange wire and it looked like there was more than 9 wires at that end.