ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


zzr1200guy
Reaction score
556

Latest activity Postings Model Railroad Photo Gallery About

    • zzr1200guy
      zzr1200guy replied to the thread The Decoder Install Thead.
      So, after numerous failures of the 4 new Digitrax decoders I installed in these Bachmann F unit I pulled the two SDXH167d decoders out...
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      This is how I assembled and installed these Caboose Industry's 220s Power Routing Grown Throws for the 2 siding switches. We will cover...
    • zzr1200guy
      zzr1200guy replied to the thread The Decoder Install Thead.
      So, my gears came in from Northwest Short Line for this Bachmann Spectrum Doodle bug so it's time to get it back in-service and since we...
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      So, I'm finishing this up this track work finally. Glueing down the track and putting in the power drops. I hope that crossover...
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      Here we go with the fit of the track and the double crossover on this module We are using the Model tech rail aligners, and their power...
    • zzr1200guy
      zzr1200guy replied to the thread The Decoder Install Thead.
      Ok so there really isn't a lot I could do for the lighting since the rear light are trapped in the shell, but I do think what I was able...
    • zzr1200guy
      zzr1200guy replied to the thread The Decoder Install Thead.
      So, I dug out this engine and while at the Springfield Mass show I picked up a Soundtraxx Baldwin Fairbanks Morase Tsunami 2Decoder for...
    • zzr1200guy
      zzr1200guy replied to the thread The Decoder Install Thead.
      Ok so moving forward with the Erie Lackawanna F7 ABBA set build hers the second F7-A decoder install. In the next video, we will address...
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      It is time to lay the track on this center module, but first we need to get this roadbed down.
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      It's Time to hand fit these sections of track on siding and cut the gap for the Model Tech Protrack Rail Aligners and wire up the Pro...
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      Its Time to hand fit this last section of track on the second mainline and cut the gap for the Model Tech Protrack Rail Aligners.
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      So first we cut the rail on the previously video installed Rail aligners then we set the second Mainline rail in place to install the...
    • zzr1200guy
      zzr1200guy replied to the thread Long Island Free-Mo build.
      How thick is your foam i considered using foam fo the top but was concerned about sagging.
  • Loading…
  • Loading…
  • Loading…




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top