beiland

Great subject thread,...keep it going

Someone, other than Bachmann, should be able to produce a quality 2 truck shay or climax. (The new production Rivarossi Heislers are...

WOW, I just got around to visiting your subject thread, and hearing of your close call with that Tornado. I'm glad you survived that...

railandsail wrote: I would like to hear from anyone who has tried to 'dilute' this gummy grease, from another forum,.. Some of my...

Replacement Gear from another forum,.. gmpullman wrote: The Athearn 60024 gears will not replace the E-unit gears. They are one tooth...

UPDATE I final found the screws that hold the weight onto the chassis. They are hidden by the fixture plate that holds the speaker down...

I'm having trouble figuring out how the big weigh is attached to the bottom chassis. I was thinking it has 4 screws something like the...

Quite a number of years ago I was cruising ebay, and found this offer for sound factory equipped sound & dcc chassis that would fit E6...

kATO built a number of power chassis for other brands of locos over the years,....Concor, Atlas, Intermountain, etc I'm looking for...

JB Weld

I was originally going to screw those strips onto the existing frame portions, then the epoxy just jumped out at me :eek:.....and since...

While I work on the driveline fix(s), i decided to go forward with a preliminary test of the concept. HALLELUJAH !! While I have yet to...

I epoxied those 2 brass strips onto the 3 chassis segments,..now have to let it cure overnight. Obviously I need two longer drive...

In order to make the 2 trucks equal distance from the ends of the car, there is going to have to adjustments made to the fitting of...

OK,..... I've started building my first pusher/helper. I have chosen the shorter of these 2 chassis to begin with. They both have the...