Well finally got round to doing some more RR stuff today.
I said in an earlier post that I need to downsize the number of loco's I have, (I have way to many), I don't run them, and I don't need them either, these are all ones that are still DC, I'm never going to convert them to DCC, especially the Bachmann's, as they are all split chassis, and too much hassle to chop chunks of weight out to make room for a decoder, so I have 15 that are going out the door, mainly Bachmann's, couple of Atlas, one Athearn and the one Mehano steamer I bought, looked at, and put back in it's box, flipping ugly and cheap looking thing that it is.
Tomorrow I need to go through my rolling stock, I don't have a lot, but the Riverrossi 84' UP passenger coaches are to go, I have the Kadee #451 couplings that I was going to fit on them, but my hands just aren't steady enough to put them together, and believe me, I've tried, so there gone.
Programmed 8 loco's and have 8 more to do, the second 8 are the latest ones I bought, all with sound, so I need to be careful I don't bugger them up, but I'll probably just change the address for each, and leave the other CV's as they are.
Still have 6 loco's I need to add decoders to, but I need to look to see which decoders I'll need first.
Fixed one of my SD60 Demo's, it had a faulty decoder, so I need to send that back next week. Also fixed 3 loco's that were semi non-runners for a friend at work, he's been asking about them for the last few weeks, so I'll drop them off when I go in to work on Monday,

it was mainly wiring or dirty wheel issue. He could do it himself, but last time he tried fixing a wiring problem, he blew the motor, (as in melted it) and electrocuted himself as well, idiot was trying to use the house mains, 240v will definitely give you a blown motor, and a new hairstyle.
Also ordered 6 lengths of Flex-Track, unfortunately they are only 38" lengths, I think there are longer lengths, but I can't find any, as I've decided to re-lay about 75% of my track, I have too many smaller sections of track which are causing havoc with the HO loco's, hopefully having longer continuous sections will make it less problematic. While I do that I'm going to reconfigure and simplify the layout, having two main loops, couple of turnouts to be able to switch trains between the two in either direction, and have one turnout each for the shunt/goods yard and industry, I may try and build a small bridge on the far side to give it a little more depth and interest, but still in the planning phase, (in my head that is), when the new track arrives I can lay it out to get a better visual idea, putting it down onto paper or using something like AnyRail, just doesn't help, I need to actually see what I'm trying to build, be able to pin it in place and run some trains to see where the problems lie, something I didn't do on the original build.
All in all, a pretty good day.
Everyone have a good day/evening, TTFN.