Running Bear's January 2026 Coffee Shop
- Thread starter bnsf971
- Start date
ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.
While searching to see if NCE supported it, I found this info on the JMRI website:
XpressNet is a Command Bus developed by Lenz and used by: Atlas, Hornby, Lenz, OpenDCC (DIY), Paco Canada (DIY), Roco (some models), Viessmann and ZTC Controls.
What are you checking?
I'll also be adding WiThrottle support sometime soon which will handle Digitrax (with LNWI module), JMRI, NCE (with WifiTrax module), DCC-EX, etc. I have an LNWI module to test with, and I think I can switch my DR5000 over as well to support Loconet or WiThrottle. I also have the YaMoRC upgrade network chip for the DR5000 which will support all of these so I can test them but I have not yet installed it.
My goal is to make a Throttle that supports as many command stations as possible (and at the same time in case you have for example a Z21 or DR5000 or YaMoRC and an LNWI plugged into the LocoNet).
Update: It also seems TCS supports it with their LCC Command Station
Good morning! It's Tuesday, 7°F and mostly clear.
Have a great day!
www.thingiverse.com
but i have the plans on 4? different K Barriers modules. the idea is to draw them by myself.
because then, i "own" them when i print them, because maybe i will also add them to my shop
And i kinda find it funny to draw them by myself. Learning the drawing part is also cool
Cheers
Marco
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)
- Status
Kusojiji
RANK AMATEURS OF THE MODEL RAILROAD FORM MEMBER
My buddy's wife had me off of red meat for a while. We'd eat fish and chicken mainly, along with the grazing. I forget how long I was doing this, but when I got stationed in Japan in '94, my friend introduced me to Japanese wagyuu and I was miraculously cured.
Kusojiji
RANK AMATEURS OF THE MODEL RAILROAD FORM MEMBER
That seems to be a small group of manufacturers.
While searching to see if NCE supported it, I found this info on the JMRI website:
XpressNet is a Command Bus developed by Lenz and used by: Atlas, Hornby, Lenz, OpenDCC (DIY), Paco Canada (DIY), Roco (some models), Viessmann and ZTC Controls.
What are you checking?
chadbag
Well-Known Member
My code. My code is currently supporting the Z21 (Roco), which in reality is XPressNet. My DR5000 supports multiple protocols including a Z21 mode, and since my handheld WiFi throttles are Z21 wlanMAUS devices that is what my app supports initially. I have someone with a real Z21 who said he'd help me but I'd like to test it with other XPressNet based command stations.
I'll also be adding WiThrottle support sometime soon which will handle Digitrax (with LNWI module), JMRI, NCE (with WifiTrax module), DCC-EX, etc. I have an LNWI module to test with, and I think I can switch my DR5000 over as well to support Loconet or WiThrottle. I also have the YaMoRC upgrade network chip for the DR5000 which will support all of these so I can test them but I have not yet installed it.
My goal is to make a Throttle that supports as many command stations as possible (and at the same time in case you have for example a Z21 or DR5000 or YaMoRC and an LNWI plugged into the LocoNet).
Update: It also seems TCS supports it with their LCC Command Station
Last edited:
Bill Tidler Jr.
Retired N&W/NS Signalman
Good morning! It's Tuesday, 7°F and mostly clear.
Have a great day!
Good morning. It's clear and 33.
I'm sure it's just a coincidence that in order to plug this issue, the user needs to upgrade to the latest OS, which means the one over half of users don't want because it's soooo bad...
https://www.msn.com/en-us/news/tech...-of-iphones-are-exposed-to-attack/ar-AA1UwCQL
I'm sure it's just a coincidence that in order to plug this issue, the user needs to upgrade to the latest OS, which means the one over half of users don't want because it's soooo bad...
https://www.msn.com/en-us/news/tech...-of-iphones-are-exposed-to-attack/ar-AA1UwCQL
traiNscale
Well-Known Member
well
- fog allover the airport
- WEF traffic is coming and going
- outside around 0 Celsius
atm iam researching K Barrier Rails, i found a nice page with all the measurements. so i will draw them and then see if the PLA printer of my friend prints em nice, or if my resin printer is better in the end We will see. of course i keep you posted.
tonight i think i will invest an hour or so in my layoutroom, to see whats left of nscale track that i dont need anymore and sell it of. i need space. soon my showcase diorama kit will arrive i think. according to UPS the label has been created (7 days ago) ahahaha.
wish you a great day.
cheers
Marco
- fog allover the airport
- WEF traffic is coming and going
- outside around 0 Celsius
atm iam researching K Barrier Rails, i found a nice page with all the measurements. so i will draw them and then see if the PLA printer of my friend prints em nice, or if my resin printer is better in the end
We will see. of course i keep you posted.tonight i think i will invest an hour or so in my layoutroom, to see whats left of nscale track that i dont need anymore and sell it of. i need space. soon my showcase diorama kit will arrive i think. according to UPS the label has been created (7 days ago) ahahaha.
wish you a great day.
cheers
Marco
RetiredinIowa
Well-Known Member
Morning ladies and gents
I smell tacos!
I smell tacos!
migalyto
Well-Known Member
Good morning all!
Another cold day in store. Currently 2F with a real feel of -8. High is only supposed to hit 8F. Next 10 days don't look any
better. Have a few things to do so I have to go out in it today.
Basketball game tonight is away, so the customary Culvers stop is probably in order.
Not much else going on. Usual household chores today.
Have a safe day everyone, stay warm!
Another cold day in store. Currently 2F with a real feel of -8. High is only supposed to hit 8F. Next 10 days don't look any
better. Have a few things to do so I have to go out in it today.
Basketball game tonight is away, so the customary Culvers stop is probably in order.
Not much else going on. Usual household chores today.
Have a safe day everyone, stay warm!
RhB Michael
RhB Lokführer
12°F here this morning. Good morning folks.
My space heater just about ran me out of my bedroom last night. It was very toasty by 0600. I'll have to lower the thermostat some before bed tonight.
Back to the optometrist today at 0900 to see how the drops have been doing for the eye pressure. I hope they fit me for new glasses today too. I think she has the glasses on the back burner for now until they get this pressure under control.
Might clean track today and run trains. We'll see.
Have a great rest of the week! Servus!
My space heater just about ran me out of my bedroom last night. It was very toasty by 0600. I'll have to lower the thermostat some before bed tonight.
Back to the optometrist today at 0900 to see how the drops have been doing for the eye pressure. I hope they fit me for new glasses today too. I think she has the glasses on the back burner for now until they get this pressure under control.
Might clean track today and run trains. We'll see.
Have a great rest of the week! Servus!
troyphoto
Snarky Old Fart (in training)
They exist on Thingiverse:atm iam researching K Barrier Rails, i found a nice page with all the measurements. so i will draw them and then see if the PLA printer of my friend prints em nice, or if my resin printer is better in the end
Thingiverse - The community for Open Hardware
Thingiverse - The community for Open Hardware
www.thingiverse.com
troyphoto
Snarky Old Fart (in training)
You know how I said I was getting my circadian rhythm reset.
Scratch that.
Sciatica kept me awake after the 2:30 am pee run.
The cat deciding to sit on my hip as I tried to doze didn't help. went down to the recliner and did some light dozing with the cat. Nothing deep. So, I've been up, watched a couple of coaching videos for authors. Then showered.
Cleaned the cat boxes, then water fountain #2 and changed it's filters. Cat should be happy.
Going to head to the grocery and hardware in a while. Shepherd's pie tonight. Chili later in the week. (Tomato soup for Willie)
Scratch that.
Sciatica kept me awake after the 2:30 am pee run.
The cat deciding to sit on my hip as I tried to doze didn't help. went down to the recliner and did some light dozing with the cat. Nothing deep. So, I've been up, watched a couple of coaching videos for authors. Then showered.
Cleaned the cat boxes, then water fountain #2 and changed it's filters. Cat should be happy.
Going to head to the grocery and hardware in a while. Shepherd's pie tonight. Chili later in the week. (Tomato soup for Willie)
TLOC
Well-Known Member
Good morning from Wisconsin where I have been awake maybe 10 minutes as I start typing. -8f degrees now heading up to 15 later. The winds were gusting up into the 30’s yesterday so it was real nasty yesterday. Right now the wind is at 5mph and gusting to 10 so today will feel lots better than yesterday.
I just looked at the movies for today and I don’t see anything Terry will want to see, I hope. They all looked uninteresting. We are trying to get back into the Tuesday movie groove but we don’t do horror or kids movies. Of the 12 movies listed at our local theater there is one comedy that she might pick but we have seen 2 others listed. The rest are genres we generally pass on
Troy. IU beat Miami for the college football championship. I just checked ESPN.com. That the bigs news around you…
I’m not right, so heading back to the pillow
Later
I just looked at the movies for today and I don’t see anything Terry will want to see, I hope. They all looked uninteresting. We are trying to get back into the Tuesday movie groove but we don’t do horror or kids movies. Of the 12 movies listed at our local theater there is one comedy that she might pick but we have seen 2 others listed. The rest are genres we generally pass on
Troy. IU beat Miami for the college football championship. I just checked ESPN.com. That the bigs news around you…
I’m not right, so heading back to the pillow
Later
Patrick
What, me worry?
Morning all,
As I was reading to catch up on all the posts, it felt like Monday and I was wondering why we had 4 pages on a Monday already. Seems to happen when a Holiday falls on a Monday and you spend the day in bed dealing with the crud. Feel somewhat better today and decided to do the fair thing and give back to those other employees who passed it to me....They're welcome!
Currently 18° and clear with a high 48° later today. Sounds like the weekend is going to be nasty. While it's been mild thus far this year, I now understand why people head south for the winter as well. I'm finding the older I get, the less I like the cold.
As I was reading to catch up on all the posts, it felt like Monday and I was wondering why we had 4 pages on a Monday already. Seems to happen when a Holiday falls on a Monday and you spend the day in bed dealing with the crud. Feel somewhat better today and decided to do the fair thing and give back to those other employees who passed it to me....They're welcome!
Currently 18° and clear with a high 48° later today. Sounds like the weekend is going to be nasty. While it's been mild thus far this year, I now understand why people head south for the winter as well. I'm finding the older I get, the less I like the cold.
traiNscale
Well-Known Member
get that.They exist on Thingiverse:
Thingiverse - The community for Open Hardware
Thingiverse - The community for Open Hardware
but i have the plans on 4? different K Barriers modules. the idea is to draw them by myself.
because then, i "own" them when i print them, because maybe i will also add them to my shop
And i kinda find it funny to draw them by myself. Learning the drawing part is also cool
Cheers
Marco
- Status
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)