Track status light won't go off on boosters. when you shut down the camand station. Eny buddy know what might be happening I did replace my loco net cable & rest cv39. also changed cv29 to 06 I also had to put my locomotives back to their default factory settings cv8to 08 CV 29 to t in opsw. I think it might be the gaps are touching sum wear not shur but I now have the locomotives shorting out at the gaps crossing over from district my gaps were cut with a dremel. Then filled with apoxe then shaped. So I have 2 problems. 1 problem at a time it's the track status light problem that is keeping g me up at night.