Roundhouse Track Wiring Help

[BNSF4723]

Hi Ya'll say what is the best way too Wire 9 HO Tracks that would be going Inside a Roundhouse.Instead of just having them all Wired too 2 Wires.I did that last time Wires keep falling Off all the time.So what would be the bes alternative too Wire Them.Thamks

 

[jbaakko]

Solder the feeder wires at the far end, inside the roundhouse, they should hold much better.

 

[BNSF4723]

Ok wgat I did was take Rail Jointers and soldered Wire too the 3 Track I had at one time.Then WIred them too the two Yard Wire Tracks & the Turntable too,those were all splced togther to the Roundhouse Tracks and the Yard Track.But what I am trying too say if I already Had the 9 Single Tracks. With 2 Rail Jointers on each Track and had Wires Soldered too the 2 Jointers that would be 18 Total Wires.Coming from teh 9 Single Roundhosue Tracks how should I connect those to the 2 Main Wires coming from the Single Mainline Track.That is what I am asking You.Please tell me step by step info Thanks for your Reply JBAAKKO

 

[jbaakko]

Don't. Connect the roundhouse feeders to an electrical socket, somewhere along the lines of this:
http://www.alliedelec.com/Search/Pr...&DESC=SY4S-05&R=814-3022&sid=45171C001521E17F

I'm in no way an expert on this, I'd suggest going to a store like Home Depot, or Lowe's and tell them what you need. Tell them you have one feeder wire, that needs to be split to 9 separate places.