ModelRailroadForums.com is a free
Model Railroad Discussion Forum and
photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.
Anybody know how to remove the body from the chassis of this model/
It's quite an old model and is a reasonable representation of a Reading I10sa 2000-49 series.I can see screws on the side and underneath but I want to be sure....
I got it dirt cheap,no box or instructions.
Thanks
Steve
Pictures always help us identify what you have.
No can do I'm afraid-don't have the kit!
You don't have the model? Others may have a better idea with a picture. There is a website with the instructions archived that may help. I'll look for it as I'm on my cell instead of my desktop.
Hoseeker.net may have what you need.
We really need a bit more information than you have given us, but try this out.
Bachmann Northern
I think those are the only 3 screws. I used them back when I was modeling 1948-1952 RDG, but haven't taken one apart in a decade or so since I went to 1900 era.
I have the model,not the means to take photo's!
I'll try Hoseeker,I seem to recall he had lots of instruction sheets and suchlike.
I've been away from modelling for around 5 years-thanks to all anyway.
I think those are the only 3 screws. I used them back when I was modeling 1948-1952 RDG, but haven't taken one apart in a decade or so since I went to 1900 era.
Thanks Dave-yes they were the ones,I took it to bits today,removed the smoke maker and UP numbers and lettering
Steve
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website
(Learn More Here)
