Terry Isn't home ownership an adventure? We had almost the same cabinet issue except ours was a colder than the rest. Ya different climate. Was able to put in R19 so it is good to go.In the ten minutes or so since the above post, it started raining.
Yesterday, I took advantage of the extra day off I had from using a PTO day, and performed some maintenance around the house.
First, I had noticed the cabinet where I keep my hand appliances (toaster, air fryer, etc) is significantly warmer than the surrounding cabinetry, so I investigated. After I killed the wasps and sprayed multiple nests with bug killer, I discovered the entire panel where the cabinet is located doesn't have any insulation. So, I ripped apart the back of the cabinet and added some R13 insulation, and closed everything back up. The cabinet now smells like bug spray, but at least it isn't an auxiliary food warmer now.
I then moved outdoors to perform some touch-up paint work on some of the trim around where I had fixed a roof leak a couple of months ago. As I was painting, I noticed an inordinate number of wasps flying around the area, and investigated. I found a large active nest of them on the underside of a palmetto frond less than two feet from where I had been working on the trim, and it was covered in wasps. Have I ever mentioned I am allergic to wasp and bee stings? So I went back inside and found the can of spray I had exterminated the wasps "inside" the house, and, standing as far away as possible, sprayed the remaining bug spray on the nest. To say the wasps were disturbed would be an understatement. I was about 10 feet away when I blasted them, and immediately departed the area at top speed, heading back inside. The wasps flew around the nest for several hours, trying to sting anything that came near. Luckily, "anything" was the side of my house, and the side of the neighbors' house. But still..
I ordered another can of spray, which will be here before noon. Where the nest is, I can open a window, hose them down, and shut the window, without going near them again.
Next, I'm going to replace a weird two-wire style outlet with a standard outlet, so I can plug in 120v equipment that has a separate ground, instead of having to use a grounding adapter.
Man, you must be moving up in the world if they didn't make you work on a PTO! hahaday off I had from using a PTO day
It's an outlet that only will accept two-prong plugs, rather than the standard outlets that have the two prongs plus ground. In an area that has a lot more lightning than most, I want everything to be grounded properly, rather than the "ground through the outlet box" that never seems to be grounded.Define 'weird' two-wire outlet? Is there a Earth ground in the box or just 2 wire?
Are you installing DCC in that?I was stuck with installing crew into my Rapido Pannier tank since the body comes off in order to access the electronics. I plan to install a headlight later and didn't want the crew to be breaking off all the time. I mentioned this on another forum and a response was to use black tac. I hadn't thought of that and used blue tac that I have.
View attachment 275764
And viola! Removable crew!
View attachment 275765
View attachment 275766
This is the value that I get out of hobby forums. The sharing of ideas.
I don't know of any forum that tolerates posting about politics or religion, unless of course those are the focus of the forum(s).I think you'll find the BS at a much greater level elsewhere
I know you're being strong for her. BTDT with Nicki a half dozen times over the last 5 years.Good morning Crew though we now seem to be missing 1. I understand frustration with the forum at times and we all know I have pushed the political boundaries but I truly respect the job Terry does (I wouldn’t do it) and the place Bob operates for us. Rules are rules. Though I am a gun owner and have a concealed carry license I feel a bit out of touch with the gun owners here. But you know if there is something you don’t like or a photo you don’t want to see just move along. KUSOJIJI wrote it best:
This is the value that I get out of hobby forums. The sharing of ideas.
I wholeheartedly agree but RUNNING BEARS DINER is a free for all of chat within the forum rules
That said. My Terry is still frustrated and yes I over reacted yesterday because my best friend, lover and rock of my life is collapsing and she’s never been like this even during her past family dramas. I’ve had cancer 2 times and 2 thankfully minor strokes. She’s been there and I feel I’ve failed her this week because she doesn’t know if she has lung cancer or not but the doctors were pretty emphatic (42 years smoking) that they believe she does. I thought just getting her out of the house for her nails would help and though eventually it did my comments at first went over wrong. I appreciate you guys reading and responding. Her procedure is scheduled for 8am Monday and we are to be there at 6 for check in. Her doctor to perform the procedure yesterday called in sick!
We both went to hockey last night on campus with the grandson as the backup if Terry decided not to go. The plan was she’d be in the hospital last night. But since we hadn’t given the tickets away she went. We had a good time especially after the sleep skating Badger Women woke up in the 3rd period and blew open a 1-1 game winning 5-1. With an unrealistic #1 ranking coming into the season with 9 rookie freshmen on the roster and missing 3 players at the National Canadian team tryouts and our senior captain out with a broken hand they lost to OSU #2 last weekend. I still think the #2 ranking is unrealistic but they beat #15 last night. Hopefully again this afternoon at 2.
We had our 1st hard freeze last night with a low of 28f degrees. Currently 30 going to 54. Dry the next 10 days per the WeatherChannel app forecast
I looked at my purchases from the LHS after we got home from hockey last night at 10. Wow, what was I thinking? I can live with the paint choices and decoders but I needed more locomotives and scenery items like another hole in my head
Tomorrow is my return to the paper mill build in my thread about building a paper mill for a friend. I will update the thread as I move forward. It’s been quite a few months. Last night I wrote a list (couldn’t sleep) at 2 just to update myself where I am on all my commission work and projects for friends. The shop at 2 in the morning was a quiet erie place! Right now the tree project for the UP of Michigan layout are 100% formed up and leafed out with maybe 40 needing just some touch up. There are over 300 trees completed by the tree team on my shelf to transport after the ground cover is installed. 2 paper mills for commission work have structures completed but need some finished painting and some need weathering completed. I have 2 diesel commissions left to weather and bill out by 11/15. The PNW paper mill ( thread for a friend) is a custom non commission job for a good friend. I have 4 bridge kits to build, paint and weather. 2 for the friends PNW layout and 2 for the UP Michigan layout. The PNW is going to try to complete the scenic painting of the back drop the paper mill structures will stand against and in front of by 11/1. Other than me driving 15 minutes to his house occasionally until the New Year I have cancelled all the OPS Sessions I had signed up for. Just 3 work sessions at the UP Michigan layout for me the rest of the year. Terry wants me busy and not hovering over her after her after the surgery so I am lined up pretty well. Her best friend will come to stay for some time to help out and is a similar personality to Terry and a retired nurse. We will tell the son and daughter my brother and sister and only her youngest brother after the surgery is done. Not my choice but it’s her decision. My family has a tendency to fill waiting rooms during surgeries so we will wait until after.
Long live the forum and its followers
Enjoy your day
In Jersey, that's normal.You're probably familiar with the fellow in Central Texas who unknowingly ran in the primary for state representative in San Antonio and for mayor of Round Rock; and won both!
Is there any such thing as a real "Average SS Recipient"?Unless it is compensated by an increase in Medicare premiums, resulting in a decrease in net!
