Running Bear's November 2022 Coffee Shop

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


Status
Not open for further replies.
Or "non sequitur"
Heya, Jeff. On a totally different subject: Your avatar. A Porsche 356 soft top, or is it a kit car? Hard to imagine there being too many if any soft top kit cars, as there must be only a few of them, soft or hardtop combined. So I'm guessing it's an original?

I ask because I was raised on the passenger side floor of dad's 356 coupe--I used to build Lincoln Log houses and buildings while he bolted us across Four Corners in the wee hours of the night on the way to Sedona AZ, where my grandparents lived. Good times, although I have only foggy memories of my childhood in that car.

Dad traded it in for a '66 911 (rare car in the US). Thus I'm a Porsche guy even today. First car of mine was a '70 914*, and today I own a '99 Boxster and a 2000 911...Cabriolet. Soft tops, both. ;D.

[* the 914 was only a Porsche badged car, as I imagine you know. Body by Karmann, VW type four (bus) engine)...but still damned fast, even in my unskilled hands].

In any case, I love the avatar. :D
 


I think it would be cheaper to buy the damn 1:1 locomotive, than this model!!!!

 
Hello Happy Members !
Our poor little dog Iris is still alive and kicking (especially in the morning in fact). So it's another happy day for us. Yesterday she met two old friends in Lembras (Dordogne / France). Have a wonderful day !

20221116_0901102.jpg



20221116_0901104.jpg
 
Last edited:
Heya, Jeff. On a totally different subject: Your avatar. A Porsche 356 soft top, or is it a kit car? Hard to imagine there being too many if any soft top kit cars, as there must be only a few of them, soft or hardtop combined. So I'm guessing it's an original?

I ask because I was raised on the passenger side floor of dad's 356 coupe--I used to build Lincoln Log houses and buildings while he bolted us across Four Corners in the wee hours of the night on the way to Sedona AZ, where my grandparents lived. Good times, although I have only foggy memories of my childhood in that car.

Dad traded it in for a '66 911 (rare car in the US). Thus I'm a Porsche guy even today. First car of mine was a '70 914*, and today I own a '99 Boxster and a 2000 911...Cabriolet. Soft tops, both. ;D.

[* the 914 was only a Porsche badged car, as I imagine you know. Body by Karmann, VW type four (bus) engine)...but still damned fast, even in my unskilled hands].

In any case, I love the avatar. :D
Good eye! It is a replica built around a Subaru Legacy donor car. It has a tubular steel frame, with the motir where the back seat would be. The rear wheel drive from the ronow is removed, so you end up with a rear wheel drive, liquid cooled flat 4 with 175hp. It has all the creature comforts of the donor car... ABS, cruise control, traction control, power disc breaks, etc.

These were made by a company out of Tennessee. Probably around 30 of these were made. It was built in 2012 from a 2009 donor car.

As you noted, it's not your typical replica. I say replica, because it was built by a manufacturer, not by someone like me doing it in their garage. It's also a bit unusual because most kits/replicas are speedsters, while this is a Cabriolet which had a taller windshield. Oh, I forgot to mention it has a power assisted top.

My first car was also a 914. It was a 1974. I had it for 3 months before it died in a carbeque along the side of a highway in 1983.
 
Good eye! It is a replica built around a Subaru Legacy donor car. It has a tubular steel frame, with the motir where the back seat would be. The rear wheel drive from the ronow is removed, so you end up with a rear wheel drive, liquid cooled flat 4 with 175hp. It has all the creature comforts of the donor car... ABS, cruise control, traction control, power disc breaks, etc.

These were made by a company out of Tennessee. Probably around 30 of these were made. It was built in 2012 from a 2009 donor car.

As you noted, it's not your typical replica. I say replica, because it was built by a manufacturer, not by someone like me doing it in their garage. It's also a bit unusual because most kits/replicas are speedsters, while this is a Cabriolet which had a taller windshield. Oh, I forgot to mention it has a power assisted top.

My first car was also a 914. It was a 1974. I had it for 3 months before it died in a carbeque along the side of a highway in 1983.
Definitely more in reply after more sleep. In the meantime, I love it. :D
 


Morning all,

23° and clear, high of 43° later. Weather supposed to get colder this evening with a high now of 29° tomorrow.

Snowman: Loved the Star Trek vignette from SNL. Those shows were much funnier IMO than the new ones. I know I've become a grumpy old man...lol

As for some more of my favorite Christmas tunes:



You're Welcome! 😆
 
Good eye! It is a replica built around a Subaru Legacy donor car. It has a tubular steel frame, with the motir where the back seat would be. The rear wheel drive from the ronow is removed, so you end up with a rear wheel drive, liquid cooled flat 4 with 175hp. It has all the creature comforts of the donor car... ABS, cruise control, traction control, power disc breaks, etc.

These were made by a company out of Tennessee. Probably around 30 of these were made. It was built in 2012 from a 2009 donor car.

As you noted, it's not your typical replica. I say replica, because it was built by a manufacturer, not by someone like me doing it in their garage. It's also a bit unusual because most kits/replicas are speedsters, while this is a Cabriolet which had a taller windshield. Oh, I forgot to mention it has a power assisted top.

My first car was also a 914. It was a 1974. I had it for 3 months before it died in a carbeque along the side of a highway in 1983.
Those trips: I remember dad gifted me a double trailer "Golden Arrow" cast tractor-trailer-trailer rig. Probably HO scale, or 1/72." My grandparents had a large persian carpet in front of their very large fireplace. It had a dark threaded section just wide enough for a double trailer truck--it looked like a road--and I'm sure I ran it back and forth over that bit the whole time. Making engine noises in my head, if not out loud.

And I still do even today. Idle to run four traction motors as my trains crest the main range tunnel and start down the hill...then ramping up to run six and seven (it's a steep downgrade). Then to run seven and eventually to run eight* (did I mention it's a steep downgrade?). D&J knows.

People look askance and shy away. Taking a wide berth around me. :D
 
Our local started the 24 hour stuff as well. I don't listen to it because the tend to overplay a Wham song and I prefer to not get Whammed. I don't care if Deadpool likes them or not. That one song Hoovers.
If Terry is in the car, the radio is off. She has hearing issues so it’s not worth listening to. But, when I am alone it’s on. One of the local stations wanted to be the 1st station to play Xmas 24 hours and they started at midnight on 11/1/2022. I don’t mind Xmas music, say on the 24th and 25th of December
 
Good Morning All. Clear and 33°, might hit 60° today. It did hit 55° yesterday. Still rain in the forecast for Thanksgiving Day, but at least the temperature should be in the upper 50's.

Yesterday was very nice outside, no wind and mid-50's. I moved a wagonload of tomato plants over to the compost pile and sprinkled blood meal and wood ashes on them to aid in their breakdown. Continued with the garden cleanup, there's at least two more loads for composting, but there's no room yet.

Once again, the larder is bare and we will be making the weekly grocery trek this morning. Doubling up on some stuff since next Thursday is Turkey day. I expect to go again early next week to get something that we will forget this week. The free turkey promotion is still on at Kroger, and prime ribs are on sale as well.

Thanks for the likes and comments for the small scenes from yesterday's post.

I spent some time out in the train shed yesterday, looking at and starting my next project. As I have posted before, there's a few blank areas on the layout that I need to fill in. Here's one of them on the lower level.
IMG_2486.JPG

I started by filling in the ground cover between that industrial spur and the backdrop, and psrt of the ROW on the near side. Then I decided to forgo Rosa's Cafe and added an Antiques Barn and a General Store.
IMG_2487.JPG

Both the General Store and Antiques Barn are recent builds that have been on the storage shelf. Both will be weathered soon, now that I have finalized their locations.
IMG_2488.JPG

Yes, those are old Model Power switches along the wall, but they work and I don't throw anything away, ever!
IMG_2489.JPG

The antique tractor came to me with a bunch of vehicles that I purchased in bulk from a fellow forum member named Larry (the old fart) when he left the model railroading hobby. I need to add a steering wheel to it, which I think that I have in my detail parts box.
I believe that these tractors had no seats. Mine seems to be missing the fuel tank as well.
1668691831993.png



Ken (D&J) -
I bought this car because of the looming issue with petroleum. I don't want to wait till I'm standing in line for one to be delivered a year or so later and have no trade in value of my internal combustion engine vehicle. Same with the solar panel array.
It's coming, whether ya agree with it or not.
I have read posts of yours before that stated the same beliefs, which while I agree that it will happen; I don't share the paranoia that it will happen in my lifetime. Maybe in VA, but not here in Texas. I know that Biden & Co think that they can just snap their fingers and it will happen overnight, but it won't. America's electrical infrastructure just isn't ready for at home charging, and it will take years before it is. Building the infrastructure where most vehicles can be charged at home will run into the NIMBY's when it comes to power lines. Installing solar grids on homes, while working out for you is not within most American's budgets. Right now EV's cost too much for average Americans as well and mileage/charge while equivalent in some cases to mileage/fill up; the time required to charge is not satisfying to most Americans. At my age, spending $200K for the solar grid and vehicle is just not worth it. Then I see other issues. Obtaining the materials needed to make all of those batteries comes from China, which could present a significant roadblock. Efforts to mine them in North America have run into the same NIMBY's and greenies as the power line issues. Ultimate disposal of said materials hasn't been solved, just like the obsolete solar panels that are becoming an environmental disaster in CA. A whole lot more thought needs to be put into it before mandating a pipe dream.
Swal - That lead time on the shower hasn't changed much since we did ours six or seven years ago. We finally went with a small time contractor who did all of the tiling and plumbing with a little help from me. The fancy door that my wife wanted took three months to get and we just put up the old shower curtain and rod in the interim. He did the complete demolition and rebuild in just under three weeks and it only cost me $7000, plus some materials that I didn't already have. Plus the fancy shower door and $150 for him to come back out and help me install it.

Everybody have a great day.
 
Anyone here install one of those flat no curb showers. The shower I wanted to buy is a 3 month wait time. I need to buy something else with a low or no curb handicap shower,
Swal
SWAL:

While working at a retirement community we had one of those installed for an elderly gentleman at the request of his caregiver. All they did was put ceramic tile on the floor! Floor drain in the middle of the room. A little like european bathrooms where the whole room is pretty much a shower (Saw on HGTV)

The walls were tile, too, and shower head apparatus above. Sounds a bit simplistic, he did not have a shower curtain but that could be easily done.

Dave
 


Good Morning All. Clear and 33°, might hit 60° today. It did hit 55° yesterday. Still rain in the forecast for Thanksgiving Day, but at least the temperature should be in the upper 50's.

Yesterday was very nice outside, no wind and mid-50's. I moved a wagonload of tomato plants over to the compost pile and sprinkled blood meal and wood ashes on them to aid in their breakdown. Continued with the garden cleanup, there's at least two more loads for composting, but there's no room yet.

Once again, the larder is bare and we will be making the weekly grocery trek this morning. Doubling up on some stuff since next Thursday is Turkey day. I expect to go again early next week to get something that we will forget this week. The free turkey promotion is still on at Kroger, and prime ribs are on sale as well.

Thanks for the likes and comments for the small scenes from yesterday's post.

I spent some time out in the train shed yesterday, looking at and starting my next project. As I have posted before, there's a few blank areas on the layout that I need to fill in. Here's one of them on the lower level.
View attachment 156122
I started by filling in the ground cover between that industrial spur and the backdrop, and psrt of the ROW on the near side. Then I decided to forgo Rosa's Cafe and added an Antiques Barn and a General Store.
View attachment 156123
Both the General Store and Antiques Barn are recent builds that have been on the storage shelf. Both will be weathered soon, now that I have finalized their locations.
View attachment 156124
Yes, those are old Model Power switches along the wall, but they work and I don't throw anything away, ever!
View attachment 156125
The antique tractor came to me with a bunch of vehicles that I purchased in bulk from a fellow forum member named Larry (the old fart) when he left the model railroading hobby. I need to add a steering wheel to it, which I think that I have in my detail parts box.
I believe that these tractors had no seats. Mine seems to be missing the fuel tank as well.
View attachment 156126


Ken (D&J) -

I have read posts of yours before that stated the same beliefs, which while I agree that it will happen; I don't share the paranoia that it will happen in my lifetime. Maybe in VA, but not here in Texas. I know that Biden & Co think that they can just snap their fingers and it will happen overnight, but it won't. America's electrical infrastructure just isn't ready for at home charging, and it will take years before it is. Building the infrastructure where most vehicles can be charged at home will run into the NIMBY's when it comes to power lines. Installing solar grids on homes, while working out for you is not within most American's budgets. Right now EV's cost too much for average Americans as well and mileage/charge while equivalent in some cases to mileage/fill up; the time required to charge is not satisfying to most Americans. At my age, spending $200K for the solar grid and vehicle is just not worth it. Then I see other issues. Obtaining the materials needed to make all of those batteries comes from China, which could present a significant roadblock. Efforts to mine them in North America have run into the same NIMBY's and greenies as the power line issues. Ultimate disposal of said materials hasn't been solved, just like the obsolete solar panels that are becoming an environmental disaster in CA. A whole lot more thought needs to be put into it before mandating a pipe dream.
Swal - That lead time on the shower hasn't changed much since we did ours six or seven years ago. We finally went with a small time contractor who did all of the tiling and plumbing with a little help from me. The fancy door that my wife wanted took three months to get and we just put up the old shower curtain and rod in the interim. He did the complete demolition and rebuild in just under three weeks and it only cost me $7000, plus some materials that I didn't already have. Plus the fancy shower door and $150 for him to come back out and help me install it.

Everybody have a great day.
I swear, Willie. You get more modeling done in twenty-four hours than I do in a full year. Or even more right now, given that the layout is trapped in a corner behind the ailing Porsche.
Seriously...I really can't tip my hat down far enough.

I talk about it, jabber about it, think about it...collect all my grandiose ideas about it...
...but you are actually doing it.

As are you others (you know who you are, I hope).

---

A big part of why I come here. In addition to the fact that you all put up with my banter, for which I thank you all too.
 
Last edited:
Status
Not open for further replies.




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top