migalyto
Well-Known Member
My bet is pizza.
Running Bear's May 2026 Coffee Shop
- Thread starter bnsf971
- Start date
ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.
She got the Chicken Pot Pie, I got the smokehouse burger with bacon (hold the maters and pickles)
Then she went to JC Penny while I was out mall walking to get my steps. She eventually found me on a bench by the fountain. Just like when I was a teen heading to the mall after school.
I asked what she bought for me.
"A shirt in a color you won't like..."
Then why'd you buy it?
It was only $5 on clearance.
What are you going to make out it? Because, you're right. I don't like that color. I don't wear browns. Except for khaki slacks and one blazer I have from when I was shooting weddings and needed something for casual networking events.
Her dig came back with: "What can I make? There's a LOT of fabric there (size 2xl tall)
I check out MRH, MTF, ARF and of course here. I have not seen what your describing.
White peaches were $3.99 a pound and were soft but firm. I bought two and got lucky as they both were very good.
Strawberries always "look good" but are always hard and tastless. I had to cover them in sugar for any flavor at all back when I used to buy em.
John
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)
- Status
Neighbor across the street bought an MB S500 this week. This is his 3rd car since moving in 5 years ago. I'm guessing he's going to keep it until this one is out of warranty. His money, his business. I've only owned 5 cars in my life. I usually donate them right around 200k-250k when something major is needing to be replaced. I hate buying depreciating assets.
santafewillie
Same Ol' Buzzard
I wouldn't bet against that in a heartbeat!My bet is pizza.
RhB Michael
RhB Lokführer
I'm still seeing that machine language for a millisecond on two other websites controlled by Verticalscope. It has stopped here as the page refresh speed has improved
Just wondering if anyone else has noticed this on other forums you may visit.
Just wondering if anyone else has noticed this on other forums you may visit.
troyphoto
Snarky Old Fart (in training)
My bet is pizza.
Well, we ended up at Cheddars Scratch KitchenI wouldn't bet against that in a heartbeat!
She got the Chicken Pot Pie, I got the smokehouse burger with bacon (hold the maters and pickles)
Then she went to JC Penny while I was out mall walking to get my steps. She eventually found me on a bench by the fountain. Just like when I was a teen heading to the mall after school.
I asked what she bought for me.
"A shirt in a color you won't like..."
Then why'd you buy it?
It was only $5 on clearance.
What are you going to make out it? Because, you're right. I don't like that color. I don't wear browns. Except for khaki slacks and one blazer I have from when I was shooting weddings and needed something for casual networking events.
Her dig came back with: "What can I make? There's a LOT of fabric there (size 2xl tall)
migalyto
Well-Known Member
migalyto
Well-Known Member
What other forums do you visit?
I check out MRH, MTF, ARF and of course here. I have not seen what your describing.
RhB Michael
RhB Lokführer
It doesn't even last long enough to recognize individual characters, but having seen machine language many times it's unmistakable.
I've seen this on the Walther forum, RadioReference, MTF, The Gear Page, and here.
It's as though the page appears in machine language for a millisecond and then reverts to English nearly instantly. Even with glaucoma I can see this happening. Here, it appears that there is no lag in the page translation so it is not being seen here, at least by me and you.
I've seen this on the Walther forum, RadioReference, MTF, The Gear Page, and here.
It's as though the page appears in machine language for a millisecond and then reverts to English nearly instantly. Even with glaucoma I can see this happening. Here, it appears that there is no lag in the page translation so it is not being seen here, at least by me and you.
kbkchooch
Verified Human
Good afternoon Gents,
No, my #1 son has had the MVP treatment. Me, I don't really care for it, just cut my hair and cut me loose. I don't want any pampering.
On the topic of forums. I occasionally still get a message that I can't get in because of a security issue. If I wait a minute and try again I get in. Sometimes I get a blank screen and no response at all. At 1st I thought it was my internet, but other forums and FB and the Tube of You open right away. I haven't been "locked out" very long, but it still happens at time. At least once I get in I can move freely about. I'm also a member on a S10/S15 forum which always lets me in, but then shows the spinning wheel of death many times as you move from article to article.
OUCH!! And this woman claims that she loves you????
No, my #1 son has had the MVP treatment. Me, I don't really care for it, just cut my hair and cut me loose. I don't want any pampering.
On the topic of forums. I occasionally still get a message that I can't get in because of a security issue. If I wait a minute and try again I get in. Sometimes I get a blank screen and no response at all. At 1st I thought it was my internet, but other forums and FB and the Tube of You open right away. I haven't been "locked out" very long, but it still happens at time. At least once I get in I can move freely about. I'm also a member on a S10/S15 forum which always lets me in, but then shows the spinning wheel of death many times as you move from article to article.
Does it come with a Bidet function? You know, something to wipe out the Kling-ons??
migalyto
Well-Known Member
Well, it does circle Uranus...Does it come with a Bidet function? You know, something to wipe out the Kling-ons??
westtexjohn
Well-Known Member
Last week fresh peaches at my grocery store were $4.99 a pound and they were hard as baseballs.
White peaches were $3.99 a pound and were soft but firm. I bought two and got lucky as they both were very good.
Strawberries always "look good" but are always hard and tastless. I had to cover them in sugar for any flavor at all back when I used to buy em.
John
NYC_George
Well-Known Member
A friend sent me this in a message yesterday. Great Movie, Great Ending. Swal
DeaconKC
Well-Known Member
Good evening folks, hit 76 here today, but never got sunny. Supposed to get some rain tonight/tomorrow, but all bets are off. Started the day off with a Men's Prayer Breakfast at Church, then headed in to the gun store to work the rest of the day. They had a little Ruger Wrangler come out of a failed pawn and I picked the little beast up. Needs a serious scrubbing and some TLC but they are great little 22s, this one is the Bronze color and has a birdshead grip. Picked up my Missus after work and we went to Arby's then home. Getting to watch the Cardinals in their second game of a doubleheader, they won the first one. You guys have a good evening.
Kusojiji
RANK AMATEURS OF THE MODEL RAILROAD FORM MEMBER
I haven't seen it yet. Might be my eye refresh rate is too slow...
troyphoto
Snarky Old Fart (in training)
Posted an update to my layout thread, but wanted to comment here on the figure size in Nscale to HO.
First, I wanted to check my math, so I just typed in what gaming scale does HO relate to? HO is 1:87, and I know it's about 18mm or 20mm.
But the Gemini AI bot in my Chrome browser wanted to argue with me. It kept fishing out different manufacture data on different figures (toes to eyes vs toes to top of head).
I told Gemini it was wrong, and flipped back to Claude (which I pay for). Told it what Gemini was telling me, and I said it was smoking crack with it's answers.
Claude's response: Ha — Gemini having a bad math day is always entertaining.
Yes, my AI buddy is snarky
Anyway, here's the photo:
Figures on the right are Woodland Scenics N-Scale. Gray dude in the center is a MiniPrints of Ron from Ron's Trains n Things.
Figure on the left is an (Old glory??) American Civil War 15mm soldier. Might be closer to 18mm than 15. The grid is 1 inch square for reference.
This told me I was correct in the switch. Even with the miniprints figure, there's just no detail. And while I paint better than the "slap it on" method of the Woodland Scenics kit painters, You can't do much with that small of a canvas.
As long as I print my own figures, I'll have details a-plenty in HO scale to paint.
First, I wanted to check my math, so I just typed in what gaming scale does HO relate to? HO is 1:87, and I know it's about 18mm or 20mm.
But the Gemini AI bot in my Chrome browser wanted to argue with me. It kept fishing out different manufacture data on different figures (toes to eyes vs toes to top of head).
I told Gemini it was wrong, and flipped back to Claude (which I pay for). Told it what Gemini was telling me, and I said it was smoking crack with it's answers.
Claude's response: Ha — Gemini having a bad math day is always entertaining.
Yes, my AI buddy is snarky
Anyway, here's the photo:
Figures on the right are Woodland Scenics N-Scale. Gray dude in the center is a MiniPrints of Ron from Ron's Trains n Things.
Figure on the left is an (Old glory??) American Civil War 15mm soldier. Might be closer to 18mm than 15. The grid is 1 inch square for reference.
This told me I was correct in the switch. Even with the miniprints figure, there's just no detail. And while I paint better than the "slap it on" method of the Woodland Scenics kit painters, You can't do much with that small of a canvas.
As long as I print my own figures, I'll have details a-plenty in HO scale to paint.
TLOC
Well-Known Member
What is MTF?
- Status
Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)