Running Bear's January 2023 Coffee Shop

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


Status
Not open for further replies.
I was very fortunate to have had the opportunity to attend Culver Military Academy for high school. It's a boarding school in Northern Indiana that happens to have one of the best college prep hockey programs in North America.

My first year there, I was assigned a roommate who played hockey. His name was Gary Suter. His Brother, Bob, was on the 1980 Olympic team that won the Gold. Gary went on to be Rookie of the Year (1985, I believe), and, unfortunately, is remembered more for "tomahawking" an opponent than all his amazing defense work.

He was a good friend who I lost contact with. The whole Suter Family is sort of like Hockey royalty, especially in Wisconsin. I believe he was from the Madison area. He had a friend who also came to Culver that year. His name was Matt (I forget his last name). Matt was a better defensman than Gary was, but Matt didn't like it at Culver, and ended up leaving to go back home. No clue whatever happened to Matt, but I suspect he never pursued a career in Hockey. Too bad. He was something special to watch.
Oh yeah! The Suter family is definitely hockey royalty in this state. Along with the Johnson family, former HC Bob Johnson and his son Mark who scored twice against the Russians in the 1980 Miracle on Ice game. Mark also coaches the UW Womens hockey team. They rank right near the top. Met Gary once. Met his brother Bob a few times at functions around the Madison area.

Small world
 
I had things backwards... Matt was my roommate, not Gary. The 2 of them were fun to watch. They were impenetrable on defense, and they both could hip check like a pro at age 15.

Gary was a good 4" shorter than I, and I probably had 20 (or more) pounds on him, but I would never have wanted to tangle with him. He was a tough son of a gun. A good friend to have on your side.
 
Finished cleaning the sidewalks and driveway, finished my ice melt, finished my shower, finished my lunch and it’s still snowing. Light wet flakes are still coming down but are not amounting to much except for the aggravation factor. Dinner out tonight is a debate as to where, but it won’t be downtown.

I feel like I need my nap early, I am worn a bit from the snow clearing efforts. Looks the only thing in the train room today is running a locomotive and a few cars in the paper mill. I need to order some Vallejo Air and Tamiya Paints. Both my normal online places have disappointingly almost doubled the shipping costs. My last order was 10/2022. Even with Wisconsin State and the local County sale taxes my LHS prices are looking better. Today was a planned trip to Hiawatha Hobbies but the snow ended that idea.

0D8F71F8-4CF3-43A4-9AD4-A339D4CC3CFD.jpeg
 


I had things backwards... Matt was my roommate, not Gary. The 2 of them were fun to watch. They were impenetrable on defense, and they both could hip check like a pro at age 15.

Gary was a good 4" shorter than I, and I probably had 20 (or more) pounds on him, but I would never have wanted to tangle with him. He was a tough son of a gun. A good friend to have on your side.
One of the guys in my HS class from my hometown in South Jersey sent both of his kids to Culver. His daughter now goes to UI & his son just accepted a scholarship from Duke to play lacrosse.
 


In today's house building installment my son and I went up for a late lunch break once again for about 1 hour. It was upper 20sF or maybe 30F. Cloudy but the sun did shine through for a short while which warmed my back... As I said before, once you get out there and are busy it's not cold. The hard part is opening the garage and getting in the car to get there.

Anyway, my son worked on cleaning out the lego tops of dirt and gravel, and concrete, and a little snow and he put another long foam block on next to the corner we did yesterday. He had to cut it short since it ended on a seam. (This section of wall is relatively short and you'll always have a seam in the middle where the two wall pieces join (you start in opposite corners and work to the middle and that is where the seam is since your wall is never exactly the right length to just use the wall pieces without a seam).

IMG_2344.jpeg

Just a short ways to the right of that where the garage starts, the foam was only one sided so that we had an open area to lay the pre-stressed suspended slab down. Now we need to add the second side back in so we can build up. Because we haven't been able to actually pour the slab yet (weather etc) I have to leave room underneath it for the slab concrete to go over the edge and fill up the gaps between the pre-stressed and the walls. So I took some scrap and cut it to length and height (about 3 - 3 1/2" above the pre-stressed) and zip tied the two pieces together. Because both sides originall were a normal two sided piece of foam wall they had the plastic web pieces that we had cut to separate the halves. So we zip tied thhose cut webs back together. I left one bit of the webbing longer on one end as a foot so that it woud support itself on the pre-stressed slab giving teh 3 or 3 1/2" height. I tried to leave a plastic foot from the web on both ends but ended up cutting too deeply into the plastic when I was cutting to height so only one end has the plastic foot for height. The two pieces you see stuck on top, in the photo below, are just scrap we temporarily stuck on to give us our width so that the two halves put back together are the right height. Tomorrow well put steel straightener ladder piece in and then a whole 8' long block on top which will help hold the smaller piece I added in place as well... (The above probably makes no sense without a lot of detailed pics but I just have the one pic -- suffice it to say we have to build up the second half all the way around the garage inner wall where we had only one sided foam so far. We'll do that this weekend. This was the test and to allow us to finish the wall we were working on...

IMG_2343.jpeg


By adding the second side now, leaving about 3- 31/2" of space underneath it for the concrete to flow when we do pour the garage slab, we can get the walls done without having to wait for the pour first, which saves a bunch of time as the walls we can do in the cold and snow. It should also help hold it in place for when we pour the wall since the slab will be 4"-6" thick (depending on where in the garage) so this wall piece we're adding will be partially embedded in the slab, holding it in place for later vertical wall pour.


---------


Totally unrelated, here is a pic I took on Monday when we had a nice sunny day. There were clouds on the east side of the valley up around the mountains. Unfortunately we had an inversion, so the darker color you see in the clouds below the top is actually polluted cloud/air mixture (basically smog). When it is cold and sunny in the winter, being in a valley, we get inversions which traps pollution. Basically a big mass of cold air is sitting on top of the warmer air in the valley, preventing it from going up and dispersing the pollution. When we have inevrsion there are burn bans for fireplaces etc and they tell people to avoid unnecessary driving. Of course, everyone thinks their driving is necessary :) We live on the west bench (where the mountains of the west side of the valley are no where near as tall as the east) and we tend to not get as much of the bad air as the middle of the valley or the more crowded east side.

IMG_2333.jpeg
 
Chad- in case you weren’t aware yet, the ❄️ is supposed to stay on the OUTSIDE of the basement, not the inside. Err no?? 😂🤣🙃😂

👍👍👍🤣 🤣 🤣

Yes this snow and also rain etc has been the bane of my existence this winter. I was trying to get done before Christmas with all this exterior structure but a week delay here, a week or two there (different people being able to come do their parts), weather, things taking longer than planned, etc. made us totally miss that. So we are stuck.

At least with it being anywhere form 15F early in the morning, 25F by the time we're working, to 20F morning and 30F afternoon, the snow has stayed mosty non icy light and fluffy which is easier to work in than slush and ice, which we've had earlier this month...

Until yesterday it was forecast to just be cloudy then 70% chance of snow on Sunday. This afternoon after dropping my daughter off for swim practice, I noticed a few flakes falling, and checking the latest weather guessing in my weather app, they are now showing 40% chance the next two days :(. Even if it snows, we'll be working at lunch tomorrow and alk day Saturday with my BIL. Only blizzard white out conditions will stop us...

I do want to take our 80V battery snow blower and try and get all the snow off the top since when it does warm up it will melt and that means water leaking through, which I want to avoid. I'll see if wife or daughter or both can help shovel and snow blow that on Saturday while we build up walls.
 
Just had an interesting tidbit about my newish home-town popup on the book of faces:

View attachment 160730

I don't live anywhere near Elm street, but it's interesting they put Frank here, and Klinger in Toledo a few miles away. (Ok, like 2 hours away...)
And Lt Col. Henry Blake was from Bloomington/Normal, IL, which was Wayne Stevenson’s actual hometown.
 
But that is not what you said :)
The original post was to do with the cost of a Bus windscreen and a motorhome windscreen being 5k, that's expensive for a piece of glass, or is that considered a good price in the US?

And here's a campervan for £6000.00 ( I did say nearly, didn't I) :)
Not exactly a Winnebago I know, but close enough for the UK.




 
Last edited:


Status
Not open for further replies.




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top