Trussrod
Well-Known Member
Good evening all you Turkey Gobblers, even if it was, "Flip the Bird" !! LoL That was hallairous !
I'm glad that everyone had a good Thanks Giving Diner, I was fortunate enough to be invited to a friends house where his Wife and Mom prepared a great Turkey Diner! I made up a fairly full plate and finished the whole thing off and was tempted
to go for seconds but I didn't want them to think I'm the chow hound I am, but I was just nice and full and didn't want to stuff myelf. Now I wish I had as it tasted so good! LoL
No work on my layout as I spent most of the afternoon clean a lot of Ash from my fireplace, I shoveled out three fairly large size buckets of Ash so I could get another fire going to help keep the house a bit warmer.
Justin: If your "Bachmann and my Atlas locomotives run flawlessly", that would seem to indicate the other loco's have pick-up problems. I somewhat have a similar situation in that my MDC Old Time Climax will stall at various locations where my Old time MDC 2-8-0 Consolidation won't?! It's hard to know just what the problem is or lies?
Say D&J: Glad to hear your DT402D was delivered and works as it supposed too again.
Sherrel: I had a situation yesterday when I went to post stating my post was too long so I scrolled Up from the bottom to about the half point and then held the shift key down and highlighted the text to the bottom and copied it I'm fairly sure to paste it in the next post window after the top part posted but when I went to paste it in the second post window after the 1st half posted nothing was there to paste??
I'll see what happens tonight? I'm almost sure I said to copy the lower half of the post, I'll be extra careful tonight if that happens again.
Say Ken: Your steel mill is really fantastic and the old car look great too. I seem to notice that a couple of them look
rather on the grey side compared to the others that look more on the rusty side. I thought I had an extra 1oz. bottle of Floquil Roof Brown but I don't unfortunately.
To me, seeing a mixture of the grey cars with the rusty ones adds interest so everything isn't all the same.
Say D&J: That's why they always have a boom car or flat car trailing the derrick so the boom can be lowered down to go under bridges, trestles, over passes and through tunnels let alone power & telephone lines. I would assume that the hook would rest on the car floor as apposed to being tied down unless it was being moved in a totally open area
Say Willie & Ken: It's good to hear you both keep yourself off the booze. Every ounce of liquor kills off a portion of your liver which never grows back or rejuvenates!!
Continued >
I'm glad that everyone had a good Thanks Giving Diner, I was fortunate enough to be invited to a friends house where his Wife and Mom prepared a great Turkey Diner! I made up a fairly full plate and finished the whole thing off and was tempted
to go for seconds but I didn't want them to think I'm the chow hound I am, but I was just nice and full and didn't want to stuff myelf. Now I wish I had as it tasted so good! LoL
No work on my layout as I spent most of the afternoon clean a lot of Ash from my fireplace, I shoveled out three fairly large size buckets of Ash so I could get another fire going to help keep the house a bit warmer.
Before I forget. Willie those are great rules to live by. Track work I understand all to well. Funny thing about my track plan is at first I had no issues aside from my turnouts but nowhere else. Now.....my straight sections are driving me crazy!!!! But I refuse to let it spoil my fun. Only locomotives who pick up on my bad sections are my Athearns. My Bachmann and my Atlas locomotives run flawlessly. So I make it happen for me either way.
Sent from my LGLS675 using Tapatalk
Justin: If your "Bachmann and my Atlas locomotives run flawlessly", that would seem to indicate the other loco's have pick-up problems. I somewhat have a similar situation in that my MDC Old Time Climax will stall at various locations where my Old time MDC 2-8-0 Consolidation won't?! It's hard to know just what the problem is or lies?
USP driver just showed up. The DT402D works as advertised.
Say D&J: Glad to hear your DT402D was delivered and works as it supposed too again.
Happy Day After Thanksgiving Everyone!
76 yesterday - supposed to be 76 again today and clear once again. I see that there is a possibility of another rain shower over the weekend. Sure hope it does not pass us by.
Wonderful Thanksgiving was had by all. Missed out on 4 of the grandsons who are back on the East Coast. I had two large plates of food and completely missed out on the desserts. Couldn't stuff another bite down. Gonna fuss at the wife today - maybe I can get her make another cherry cobbler .. it disappeared in a flash last evening. Guess I get to spend the day dragging out all the Christmas stuff again. There is only 17 Yooge plastic containers of lights, figures, nut crackers, stable scenes, garlands, candles, etc. WHEW! AND don't forget the 5 Christmas trees from 18 inches to 7 feet. The dogs even get into the act of the decorations, but their creations leave a little to be desired.
DARNIT! I had a very nice long message going and the computer, or forum just ate it! Really need to use a notepad to create my posts .. this happens almose daily with me.
Sherrel: I had a situation yesterday when I went to post stating my post was too long so I scrolled Up from the bottom to about the half point and then held the shift key down and highlighted the text to the bottom and copied it I'm fairly sure to paste it in the next post window after the top part posted but when I went to paste it in the second post window after the 1st half posted nothing was there to paste??
I'll see what happens tonight? I'm almost sure I said to copy the lower half of the post, I'll be extra careful tonight if that happens again.
Good morning. 43*F and cloudy with a slight breeze here in central MD.
I suppose that's what I'll have to do. Right now I'm trying to decide whether to go get a rattle-can of Krylon Camouflage Dark Brown and spray paint the cars outdoors, or hand-brush them with my Tamiya flat brown [which I can custom-mix to the desired shade]. With the weather being relatively calm like it is, the spray painting option seems highly tempting, OTOH I would have to contend with the Black Friday crowds...
Here is a shot of the new unpainted slag pots in front of the old ones:
![]()
Everybody enjoy the rest of your day!
Say Ken: Your steel mill is really fantastic and the old car look great too. I seem to notice that a couple of them look
rather on the grey side compared to the others that look more on the rusty side. I thought I had an extra 1oz. bottle of Floquil Roof Brown but I don't unfortunately.
To me, seeing a mixture of the grey cars with the rusty ones adds interest so everything isn't all the same.
Ya need to secure that hook on the crane so it's not flopping around while the train is in motion.
I'm gonna have to lower that boom so I'm not taking out my signal bridges.
![]()
Say D&J: That's why they always have a boom car or flat car trailing the derrick so the boom can be lowered down to go under bridges, trestles, over passes and through tunnels let alone power & telephone lines. I would assume that the hook would rest on the car floor as apposed to being tied down unless it was being moved in a totally open area
Ken - The mill is looking very good. Many times in the ATSF days, different cars in the same car order for Santa Fe ended up in slightly different colors both from manufacturer and degree of change even when only a few years old. But it wasn't unusual for them to order 1000+ cars in the same order, especially covered hoppers.
Congratulations to you on recognizing a demon and beating it back. I was partially joking and I actually use the same criteria as Terry uses and it has worked well for me. I also don't touch distilled spirits at all, that was my demon. Been over 40 years for that.
Willie
Say Willie & Ken: It's good to hear you both keep yourself off the booze. Every ounce of liquor kills off a portion of your liver which never grows back or rejuvenates!!
Continued >
