Running Bear’s November 2021 Coffee Shop

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


Status
Not open for further replies.
I'm always amused by the "dangerous gun" comments. I've been around thousands of guns most of my life and I have never, ever seen one suddenly shoot someone by itself. Now I have seen quite a few people, including LEOs who handle guns without thinking about where it's pointed.
Also, the number of murders by gun don't differentiate between assaults on other people and suicides. The suicides far outnumber the rest.
After 11 days of pain and discomfort, my wife finally went to an actual doctor today, and had actual xrays.
She has a broken rib.
Her sister has convinced her to speak to an attorney. Not so much for the accident, but because the bus company has repeatedly refused to speak to her at all, in any capacity.
With their attitude, and frankly i am appalled I would certainly think they deserve to be sued,try and get a pro bono, or takes a share lawyer,so you don’t pay out of your pocket,and if he is on a percentage he will go for a doable amount, ribs are not fun,luckily never broke mine but I understand the breathing the bending even the sitting down can all be agony.
 
Just make sure they have insurance and release you from any liability for whatever may happen
Willie:

Ken has a good suggestion and I like to take it one step further. Ask for a Certificate of Insurance from the contractor that "Names you as an additional insured" on the insurance certificate and this simple addition will save you a bunch of problems or liability should something happen.

In my professional life that simple cause was one item that we insisted that the contractor(s) add and in some cases the contractor was a small one or two man operation and the cost to add that terminology was something we told the contractor to add to his invoice. Usually, $50 or less.

Greg
 


Good Morning Everyone.....beautiful fall day in store for today here in this part of Wisconsin.

Still finding out that time is so short even when retired when household tasks and medical appointments starting filling up my week's calendar. Don't forgot now it's football time and in Packer county everything stops during a Packer game!

I been checking the web for cab rides and I get ideas from most of the videos I've watched. Also, this Forum has a wealth of ideas that I find helpful and I may need to start a list of what I've learned and liked to use on my layout. Our informal model railroad club is having lunch this Saturday and we share a lot of ideas during our layout visits and when face to face and just talking model railroading.

With the above said it's time to move on to model railroading.

I been looking for years for fire fighting apparatus with flashing red warning lights for my layout. Walthers has these units on their Showroom Display layout and they been discontinued. I look at them every-time I'm in the Walthers Showroom. I was pleased to find some fire equipment after reading about them in the MRH online magazine. East Coast Circuits (ECC) modifies Walthers Scene Masters equipment with LED's and electronics. Unfortunately, I found most of ECC equipment to be sold out or have a estimated arrival date.

Harris Hobby in Texas has what I wanted albeit more modern than I would like, but the pumper will be located in the back of the layout on a burned out area of the layout and only the purist will notice the age of the equipment. A smoke generator will add to the scene.

1637169977335.png

My unit was shipped this morning. This unit will be perfect for the fellows handling the fire duties on the hillside caused by a passing locomotive. I think I'll add a logo of CM&N RR on the side of the pumper.

I miss working at my work area which is located under my layout and I like to run a train or locomotive while I do hobby projects. There is something about hearing steel wheels running on the rails.

Looking for a reconditioned lap top to connect my Digitrax PR 4 to at the workbench. It's a hassle to carry the locomotives upstairs to where I have the PR-4 and my PC to check CV's or make changes to the locomotive's CV's.

That's about it........

Greg

########################

IMG_0143.JPG
I plan on changing the Walthers back ground buildings (9) out to a series of Downtown Deco structures. In my opinion I don't think the Walthers buildings would mix well with the Downtown buildings. I like the Downtown structures and with care they are fairly easy to complete. I would tone down the colors so they are more muted. I like Willie's and RE#1's work on their structures. I have to work on how I install building signage and have more hours of practice.-Greg
 
Hey guys,

Two part question. My club is gradually equipping our layout with remote throw switches (like from a throttle), and some switches could use obvious stands with targets to tell if thrown or not.

1. Can anyone recommend an article or method to retro equip servo switches with moving/turning targets?

2. Can anyone show me or direct me to photos of C&NW switch stand targets? Our freelance railroad is based on CNW. Thanks!
 
Hey guys,

Two part question. My club is gradually equipping our layout with remote throw switches (like from a throttle), and some switches could use obvious stands with targets to tell if thrown or not.

1. Can anyone recommend an article or method to retro equip servo switches with moving/turning targets?

2. Can anyone show me or direct me to photos of C&NW switch stand targets? Our freelance railroad is based on CNW. Thanks!
It seems the targets would be on sidings or yards where the trains are moving slower. The mainline would use signal heads well ahead of the turnout.
 
Afternoon All,

Today I spent 3-4 hours in the train room and finished up the power station area. Amazing how quickly it goes when you have unlimited time and the buildings are already built. :) Tomorrow probably no train room since I have the major dining room cleaning project for Thanksgiving.

IB Ken- I have the same thing in Pennsy (of course!). I have a Digitrax motor decoder in it but it still runs crappy. I just stage it.

Willie- That's a lot of good detail parts.

Sherrel- I'm usually up at 0700 but normally don't post in the forum until during the afternoon.

Guy- We pay for no snow by 6 months of high humidity and hurricanes. There's always a downside.

Greg- Nice scene.

20211117_133337.jpg

20211117_133347.jpg

20211117_133358.jpg

This is the next project. It's FOS Hendrix Type foundry.

20211117_133844.jpg

20211117_133325.jpg

I hope everyone has a good night.
 


Well, howdy there people.

It's Troy again.

Today lets talk endemic...

Five days ago I left my Author Conf in Vegas. Following my booster shot, I decided I was only going to mask up when required. Technically, we had to in the conference center. But. walking to and from the coffee to my table wasn't a higher risk than sitting at the table and sipping coffee while I networked with others. Hotel proper, we masked up (which helped with the smoke that is Vegas - ugh...)

That's what an endemic is... what we have with influenza, and other corona viruses. They circulate, we reduce risk, maybe get them, fight them off, go on with our routines once we're better. That's what the vaccines are to help with. reduce severe illness, shorten durration. For many, you won't know you had it. For others, mild cases. for a rare few, severe cases.

But, we just had our first reports of two of the more well known attendees testing positive. One was ALWAYS masked when I saw him outside of restaurants. The other is a popular author, and host of a podcast for authors. So he had a lot of time not masking.

I'm checking temp and watching for systems. So far, ok, but we're in the part of this thing where we're going to have to learn to live with it. That means getting as many people vaccinated, and being as sensible as we can be.

And in a rare display of self promo - here's the book I just finished... be available next month. It went to the editor this morning.
257978812_444200080389910_5014137581888831807_n.jpg
 
Guy, get the snow blower professionally tuned up. My Craftsmen snowblower starts on the second pull. Shoveling is great exercise but so is snow blowing.

Be safe

TomO

My Craftsman also is a 2nd pull starter, spends its summers out in an unheated shed with the pressure washer, wood chipper, push mower, tiller and both the tractors. All start quickly with no special care from me. Must be livin a charmed life.
 
Good Afternoon!

I suppose you've all heard the two Canadian rail links across the Rockies to the Pacific have both been broken. This a result of the disastrous flood situation in British Columbia.
BC.jpg

I'm on the eastern side of the Rockies, and the rains that flooded BC appeared as snow where I live.
Even though I had to shovel, I'd rather the snow than the winter rains.

Jaz avalley - I wouldn't care to model snow, as with so much of the real thing, I prefer not to be reminded through enjoyment in the hobby. Looks like you are quite a capable snow modeler, though.
 


Status
Not open for further replies.




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top