New Hood Sides

[railflyermodel]

Guys,

Going into production this week with our Datron M7HP are these 3D machined hood sides. They are 0.040" Styrene with pockets to accept either Cannon or Railflyer components.

They include the roof sections for both the clean air room and radiator. All bolt, weld seams, and plate detail similar to our photo-etched clean air room sides are included.

EMD/GMDD GP38-2 (CANNON)
2013-0501-0001 GP38-2 As Built Pre-10/72
2013-0501-0002 GP38-2 Mid
2013-0501-0003 GP38-2 Late
2013-0501-0007 GP38-2W CN 4670-4810
2013-0501-0008 GP38-2 CP 3021-3135
2013-0501-0011 GP38-2 CN 5500-5559
2013-0501-0013 GP38-2 ON 1800-1809

EMD/GMDD GP38-2 (RAILFLYER)
2013-0501-0004 GP38-2 As Built Pre-10/72
2013-0501-0005 GP38-2 Mid
2013-0501-0006 GP38-2 Late
2013-0501-0009 GP38-2W CN 4670-4810
2013-0501-0010 GP38-2 CP 3021-3135
2013-0501-0012 GP38-2 CN 5500-5559
2013-0501-0014 GP38-2 ON 1800-1809

Note*
AC 200-205 use 0002 or 0005
DV 216-228 use 0002 or 0005

EMD GP39-2 (CANNON)
2013-0501-0017 GP39-2 Phase 1a CSX/DH/RDG/ATSF 3600-3616
2013-0501-0018 GP39-2 Phase 1b ATSF 3617-3668
2013-0501-0019 GP39-2 Phase 2a ATSF 3669-3682
2013-0501-0020 GP39-2 Phase 2b ATSF 3683-3705/BN 2700-2739

EMD GP39-2 (RAILFLYER)
2013-0501-0021 GP39-2 Phase 1a CSX/DH/RDG/ATSF 3600-3616
2013-0501-0022 GP39-2 Phase 1b ATSF 3617-3668
2013-0501-0023 GP39-2 Phase 2a ATSF 3669-3682
2013-0501-0024 GP39-2 Phase 2b ATSF 3683-3705/BN 2700-2739

EMD/GMDD GP40-2 (CANNON)
2013-0501-0025 GP40-2 As Built
2013-0501-0026 GP40-2 Late
2013-0501-0027 GP40-2L CN 9400-9636/GO 700-711
2013-0501-0031 GP40-2W CN 9637-9667

EMD/GMDD GP40-2 (RAILFLYER)
2013-0501-0028 GP40-2 As Built
2013-0501-0029 GP40-2 Late
2013-0501-0030 GP40-2L CN 9400-9636/GO 700-711
2013-0501-0032 GP40-2W CN 9637-9667

EMD/GMDD SD38-2 (CANNON)
2013-0501-0033 SD38-2 As Built
2013-0501-0034 SD38-2 CN 1650-1653/NA 401-404

EMD/GMDD SD38-2 (RAILFLYER)
2013-0501-0035 SD38-2 As Built
2013-0501-0036 SD38-2 CN 1650-1653/NA 401-404

EMD/GMDD SD40-2 (CANNON)
2013-0501-0037 SD40-2 As Built
2013-0501-0038 SD40-2 Late
2013-0501-0039 SD40-2W CN 5241-5277
2013-0501-0040 SD40-2 AC 183-188
2013-0501-0041 SD40-2 BCOL 751-767
2013-0501-0042 SD40-2 CP All Versions
2013-0501-0043 SD40-2 CP Modified
2013-0501-0044 SD40-2 ON 1730-1737
2013-0501-0054 SD40-2W CN 5278-5363

EMD/GMDD SD40-2 (RAILFYLER)
2013-0501-0045 SD40-2 As Built
2013-0501-0046 SD40-2 Late
2013-0501-0047 SD40-2W CN 5241-5277
2013-0501-0048 SD40-2 AC 183-188
2013-0501-0049 SD40-2 BCOL 751-767
2013-0501-0050 SD40-2 CP All Versions
2013-0501-0051 SD40-2 CP Modified
2013-0501-0052 SD40-2 ON 1730-1737
2013-0501-0053 SD40-2W CN 5278-5363

They will be posted to our detail parts, hood section of the web-site along with images later this week.

All the best,

Christopher Howard, Railflyer Model Prototypes Inc.
www.railflyermodel.com

 

[railflyermodel]

the GP38, GP39, GP40, SD38, SD39, and SD40 variations will be released after this series is completed.

 

[PApat]

Chris, can you give us a progress report? I'm eager to get a start on the new long hoods you have been working on producing.

Thanks,

-bill