railflyermodel
Member
Hello,
Here is an update for the second half of June.
P87 40" Wheels (Stainless Steel)
Our production is due to arrive within two weeks. We've now changed the variations available to include isolators cored for 1.0MM, 1.5MM, and 2.0MM axle shafts.
http://www.railflyermodel.com/products/rp25-code-88-locomotive-wheels-isolator
RP25/88 40" Wheels (Stainless Steel)
Our production is due to arrive within two weeks. We've now changed the variations available to include isolators cored for 1.0MM, 1.5MM, and 2.0MM axle shafts.
http://www.railflyermodel.com/products/p87-locomotive-wheels-isolator
1/87.1 Scale Traction Motors
The final component needed to build and verify production samples is due to leave our supplier within two days. This will enable us to begin shipments of the traction motors in 2 - 3 weeks time. The traction motors feature a 6V motor and can use either our new P87 or RP25 wheel sets.
http://www.railflyermodel.com/products/mk-9011-traction-motor
With the arrival of the last component, we're able to build demonstration units, and send out samples for motor control programming.
We're working on funding brake detail components for our Blomberg/HTC trucks, we're expecting a late August/September release for our full drive system with the scale trucks.
We have received a large amount of photo-etch restock over the past few weeks and another batch of frame kits came in a month ago. Wendy and I have spent most of the week shipping orders with these items.
Four new kits arrived this week, new GMDD tread-plate revisions for DP 6102, DP 6103, DP 6104 and DP 6106. The new revision adds pilot holes for stanchions and deck details.
Next week, we're expecting additional photo-etch restock and the Spartan Cab related frets such as DP 6610 (Wipers), and DP 6605 (Doors).
Quality control efforts are also continuing with our Clean Air Room Bases, Dynamic Brake Sections, Fans, Hoods, and Trucks.
Have a great week,
Christopher Howard
Railflyer Model Prototypes Inc.
www.railflyermodel.com
Here is an update for the second half of June.
P87 40" Wheels (Stainless Steel)
Our production is due to arrive within two weeks. We've now changed the variations available to include isolators cored for 1.0MM, 1.5MM, and 2.0MM axle shafts.
http://www.railflyermodel.com/products/rp25-code-88-locomotive-wheels-isolator
RP25/88 40" Wheels (Stainless Steel)
Our production is due to arrive within two weeks. We've now changed the variations available to include isolators cored for 1.0MM, 1.5MM, and 2.0MM axle shafts.
http://www.railflyermodel.com/products/p87-locomotive-wheels-isolator
1/87.1 Scale Traction Motors
The final component needed to build and verify production samples is due to leave our supplier within two days. This will enable us to begin shipments of the traction motors in 2 - 3 weeks time. The traction motors feature a 6V motor and can use either our new P87 or RP25 wheel sets.
http://www.railflyermodel.com/products/mk-9011-traction-motor
With the arrival of the last component, we're able to build demonstration units, and send out samples for motor control programming.
We're working on funding brake detail components for our Blomberg/HTC trucks, we're expecting a late August/September release for our full drive system with the scale trucks.
We have received a large amount of photo-etch restock over the past few weeks and another batch of frame kits came in a month ago. Wendy and I have spent most of the week shipping orders with these items.
Four new kits arrived this week, new GMDD tread-plate revisions for DP 6102, DP 6103, DP 6104 and DP 6106. The new revision adds pilot holes for stanchions and deck details.
Next week, we're expecting additional photo-etch restock and the Spartan Cab related frets such as DP 6610 (Wipers), and DP 6605 (Doors).
Quality control efforts are also continuing with our Clean Air Room Bases, Dynamic Brake Sections, Fans, Hoods, and Trucks.
Have a great week,
Christopher Howard
Railflyer Model Prototypes Inc.
www.railflyermodel.com
