Ashes for steam locomotive ash pit?

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


Colorado Midland Modeler

Proudly modeling the CM, MT & SL in HO Scale
I built this ash pit into my layout fairly early in construction, and I want to have flickering "embers" that can be seen amongst the "ashes" when an engine is stopped above the pit. The flickering lights for the pit I have, and know how to install. The problem I have, is I can't seem to come up with good "cinders" and "ashes" to put into the pit. Does anyone have any suggestions on what I could use, and maybe some photos of your own work? Thanks.
Ash pit (My model) (1).jpg
 


As mentioned previously 'ash from the fireplace'. If you want orange particles then small glass beads coloured red-black and then crushed. Only a tiny bit are required and placed in no more than three places in the pit. All mentioned above.

As an aside. The North British Railway (here in the U.K.) used the ash in sidings as ballast. They also used to load the ash into wagons and sell it to farmers and used as a fertilizer. (Another form of freight on a model layout not often modelled. :) )
 
I tried a small batch of Pellet Stove ash that needs to be vacuumed out of the stove. After washing/rinsing it looks pretty good although maybe too small for HO. Comes up partially shiny as small 'rocks' so that would have to be toned down. Have two 5 gallon buckets of the stuff from last winter; guessing about 25 Lbs. That should be enough for now.

Time will tell.

Later
 
I've thought about using something like fireplace ashes, unfortunately, I don't have any right now as my fireplace is in need of some repairs. I've thought about real coal or charcoal ashes as well. I saw a youtube video on making an ash pit with charcoal ashes, but I figured I'd get a second opinion and see what the forum had to say. Thank you all for your help, I'll post an update when I decide which option to go with.
 




I burned some charcoal last week, collected the ashes, and I was finally able to finish my ash pit. Thanks everyone for your help! These are the results. The photos were taken with and without the overhead shop lights on, with CM 22 "testing" the pit.View attachment 198690View attachment 198691View attachment 198692View attachment 198693View attachment 198694View attachment 198695View attachment 198696
This photo seems like a fall day in a time once forgotten
 




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top