Recent content by Richard Boddington

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Online since 2002, it's one of the oldest and largest model railroad forums on the web. Whether you're a master model railroader or just getting started, you'll find something of interest here.


  1. R

    Lights No Longer Working

    Well by cutting out the last lighted warehouse the rest of the lights have come on at full brightness and the transformer no longer cuts out. The warehouse is made up of two street lights that I installed under the canopy and ran the wires out via holes I drilled on the bottom. So it's a...
  2. R

    Lights No Longer Working

    Partial Fix Ok I have it partly fixed, the last lighted unit in my circuit is not working. When I cut it out of the circuit all of the rest of the lights came back on nice and bright. Not sure if the bulbs are gone in that unit or if the wiring has failed? Of course this does not bode well...
  3. R

    Lights No Longer Working

    Ok here's my situation, I have a number of lighted buildings running off the AC of a standard train controller. They are all wired in parallel. At least I think so anyway? I have two wires that come off the AC terminals and go into the the two leads of the light, two wires come off the join...
  4. R

    AC Power Supply?

    All my engines are barely a year old. I have six, and they where all bought within a short time of each other. Thanks! R,
  5. R

    AC Power Supply?

    Great now you tell me :) Maybe after a couple of days if there is swelling on the cork bed it will go down. Then again WD40 doesn't dry out that fast :( R,
  6. R

    AC Power Supply?

    Yeah I tried some WD40, at first it seemed to help. Maybe I'll see if I can pass a piece of paper under it. I didn't use any glue around the switch mechanism of course. You bring up an interesting point....how often does one "oil engines"? What kind of oil? And do you drop it in around the...
  7. R

    AC Power Supply?

    Ok all re-wired in parallel, oh boy much much better! All the lighted houses are 10X brighter, I didn't know what I was missing :) Even the little LED on top of the water tower is much brighter. Hey I'm even getting smart at this game I left two leads extending out of the last set of wiring...
  8. R

    AC Power Supply?

    Yes that is the very one! The plastic aqua switch gets very rough to move on some, others are nice and smooth. So I wired in the dim bulb of the one house direct to the AC of the controller, now it's VERY bright. So that's the issue, series is not a good idea. I need to work out a...
  9. R

    AC Power Supply?

    They are slide switches. The reason I say aqua coloured is because I have seen these same switches on many layouts. Right now my lights go in a chain from the power supply and back again, they are not directly wired to a bus or the AC or DC terminals. R,
  10. R

    AC Power Supply?

    Ok so I moved my lights to the DC side and cranked the power to max, exact same results. Dim lights, with one in particular being very dim. I dunno? As an experiment I should wire the one dim bulb direct to the AC power on the controller and see if it changes any thing. At least that way I...
  11. R

    AC Power Supply?

    Thanks Jim, I will try the DC side for my lights and adjust the power control to see what happens. Yes my bulbs are wired in series, one lead wired to another lead, and then back to the power in a loop. There is one LED in there on the water tower. My switches are aqua coloured switches I...
  12. R

    AC Power Supply?

    I wired the lighted buildings into the AC of the spare controller I have. Same issue, bulbs are dim, especially in one house. I am using the AC accessories screws from an Atlas train controller. Will these bulbs run off the DC side of the controller? Or do I need new bulbs? On the plus...
  13. R

    AC Power Supply?

    Thanks, so they output 12-19V AC I assume? I do have a spare control unit from Atlas. It says output 17VAC. This is the what I am using for my lights and switches right now. Ok well I guess I'll unwire the lights and install them into this spare controller and see if I get any more...
  14. R

    AC Power Supply?

    Would you mind providing me with a link or item number to such a unit on ebay if you get a spare moment. I'm not 100% sure what you are referring to. Thanks R,
  15. R

    AC Power Supply?

    Greetings, I just finished re-configuring my layout. I now have five switches which are powered by the AC off of an un-used standard DC train controller. I have this wired under my train table and I am taking the power from the AC accessories screws to run my bank of five switch controls...
See more




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)

Back
Top