Time for me to show off!


After a successful day filming a video tour for Hennepin Overland club yesterday, I had to have some fun with my collection. I've been wanting to do a rainbow lineup for a long time but didn't have the chance.
IMG_20201017_205835215~2.jpg
IMG_20201017_205848855~2.jpg
IMG_20201017_185204514.jpg


I'm also starting scenery work! I'm doing touchups on a few spots of our branch line, as well as finishing our lumber mill area. Our layout has been pretty stagnant on scenery for many years. These are my first attempts with model railroad scenery and not 1/35mm scenery so there's a slight curve for me. Fortunately my club is loaded with supplies.
IMG_20201017_122720822.jpg
The flock and dirty ballast beside the rock face recently replaced naked paint.
IMG_20201017_162728472.jpg
 
Pulling some stills from the Hennepin Overland video tour footage.

Here my flagship lashup of four-axles crosses a bridge over Wobegon as a Daylight passes through down below.
6.jpg

Otherwise I finally un-goofed my goofup with my Genesis Z-8. Had it out running on North Metro last night.
IMG_20201020_175724733.jpg
IMG_20201020_183940878.jpg
Screenshot_20201021-1330432.png
 
Thanks, Alcomotive. That big brute has quickly become one of my favorites. I'm dying to get it rolling beside my Little Joe, as likely happened way back when in Montana!

In the meantime I finished this video up last night. The four Soo GP9's were loaned to me so that I might buy them. As much as I love a quartet of 567 prime movers I think I'll only get two.

 
Last edited:
This is hardly a glamour shot, but the same day I filmed that video I just posted, a North Metro clubber sold me this P2K GN SD9. I've been after a Big Sky Blue SD9 for some time, so this ol girl is a welcome addition to my collection. I love the old high-hoods, and Big Sky Blue!

IMG_20201024_202845856.jpg
 
My KCS locomotives put in some labor on ops moves the other night. The leader is an Intermountain, the trailing is a Genesis. I definitely need a third loco, and these two definitely need to put on some weight! They just barely managed to get a 30-car train up our helix.

IMG_20201104_220657914_BURST000_COVER_TOP.jpg
 
Back again with photos from the last weekend. I got my Beer Line F's running nicely. I swear I'm doing actual modeling behind the scenes. I painted a bunch of flatcar decks for North Metro club when I wasn't rolling.
IMG_20201122_221541727.jpg
IMG_20201122_225533684.jpg
IMG_20201122_230357687_BURST000_COVER_TOP.jpg

I also recently got a Pentrex DVD, three volumes of Milwaukee Road in Montana. Near the end of Vol. 3, an MN&S Thrall-door shows up on a steel bridge on the St. Paul Pass.

IMG_20201113_222526372.jpg

WELL HECK! I have an MN&S Thrall-Door, and I have access to a sweet steel bridge! I had to play with some perspective and lighting. It's eerily close.

IMG_20201122_225344865.jpg
 
Last edited:
Video, video, video lately. I've done two for my personal channel since my last posting. I was getting requests to spotlight my C&NW stuff in a video, and I'm a sucker for the old high-hoods so I paired them up with my two SOO GP9's for this.


I did a special for New Year's, intending to run this big 2,300ft train on both of my club layouts, but due to lots of traffic on the second layout I opted to not drag the big monster out. Another time, hopefully.


Finally, I snapped this money shot on North Metro last weekend. CMStP&P Mikado #8690 peeking out of the trees around the Cambridge Sub. Working on a steam trains video for this club.

IMG_20210116_200804167.jpg
 
Last edited:
I've learned that it was very common for Milwaukee trains to have pusher helpers in a few spots around the Twin Cities. So now for me, this means some ops trains I run at North Metro will end up with a little extra power on the severe grades, one being this analogue for Short Line Hill.

148333421_165066418752565_5340722750367238199_n.jpg
149058398_165066562085884_7866141390917904536_n.jpg
 
So this is new. A bunch of the MN FreeMo guys have been subtly trying to get me into their group. Finally, I couldn't resist this module. $40 for the module as is, with bridge and track included. The wiring needs to be done, though.
IMG_20210222_232649506.jpg

And my last buy for my Hill Lines stuff.
IMG_20210227_171559214.jpg

As for actual modeling, I've been busy with small projects. I rescued these two lumber loads from the garbage. Their previous owner decided they were causing him problems and just threw them away. Well, I know how expensive these things can be so I rescued them and have since repainted them (The last guy got his spray weathering all over them).
IMG_20210227_115435007.jpg
IMG_20210227_115437114.jpg

And yesterday I spent most of the day tuning up the circus train I bought a couple months ago. I'll be test running it this weekend.
IMG_20210228_123406959~2.jpg

I also got this custom painted Blue Box switcher shell. Currently weighing my options for it. I'm wondering if I can make it fit a Proto or Walthers chassis, or if I can fit a Genesis motor on the switcher chassis I have already. Either way I need to get it a pair of flexicoil trucks.
IMG_20210224_203553756~2.jpg
 
Also I had the honor of getting this consist back in action. This is a custom painted Hennepin Overland club passenger train, with three Genesis F7's for power on a rake of Walthers passenger cars. Good running train and very striking.

IMG_20210227_160709407_BURST000_COVER_TOP.jpg
IMG_20210227_160722542_BURST001.jpg
 
I've finally settled on a prototype location for my module. Thank to some help from the Minnesota Historical Society, I found this image taken of Webster, MN in 1971. That's Milwaukee's Farmington-Mankato line which crosses over the highway.

WEBSTER1971.jpg

Webster1951.jpgWebster area, 1951. Milwaukee Road F-M line crosses the grid from north-east to south-west.
 



Back
Top