My sidings look ok?

[oplholik]

Just want to see what they look like to you. There is a plan A and a plan B at the moment. This location will be a sparsely populated area with a few buildings. The sidings for my purposes will be for storing rail cars, mainly so I don't have to put extras away, maybe they can be picked up when needed, or maybe some are waiting to go on to someplace else. It also gives me an opportunity to run a switcher around in there. So does it look it like a reasonable set-up? This is N scale.Thanks.

 

[Selector]

I'm not clear on what you are meaning...which is/are the siding(s)? If you mean the closer set inboard of the two extremes, they are spaced nicely, but you have a series of S curves at the far end. You might want to correct that by mirroring what you have on the close end.

By having the far side curve, and then immediately diverge into one route as you show, you will possibly have some problems with modern longer cars or just about any passenger cars longer than 60' in scale.

-Crandell

 

[Rico]

Ditto what Crandell sez.
Looks like you have lots of room to work with so should be no problem with a better ladder.

 

[oplholik]

I'm not clear on what you are meaning...which is/are the siding(s)? If you mean the closer set inboard of the two extremes, they are spaced nicely, but you have a series of S curves at the far end. You might want to correct that by mirroring what you have on the close end.

By having the far side curve, and then immediately diverge into one route as you show, you will possibly have some problems with modern longer cars or just about any passenger cars longer than 60' in scale.

-Crandell

I see that now, I'll have to straighten that out. Thanks.

 

[oplholik]

Ditto what Crandell sez.
Looks like you have lots of room to work with so should be no problem with a better ladder.

Thanks, didn't notice that till you guys pointed it out, will definitely straighten that out.