FalconDCC
New Member
Trader post (disclosure: I’m the maker).
If you run a Kato 20-283 on a DCC layout, you’ll know "DCC friendly" just means it passes track power through — the bridge is still turned by hand on the analog box. FalconDCC replaces that box: unplug the stock controller, plug into the turntable’s original cable, and all 36 positions come off your DCC command station with shortest-path rotation. No soldering, no drilling, fully reversible.
Also included: a phone/tablet/desktop web dashboard (no app, no cloud account), iTrain/JMRI automation, an open HTTP API + WebSocket, and two on-board buttons (long-press = 180° swing). Autoreversers and occupancy detection on the bridge feed are supported.
$89, currently $79 for a short time! Ships worldwide from falcondcc.com
Demo video:
Details/manual: falcondcc.com
Happy to answer any questions!
If you run a Kato 20-283 on a DCC layout, you’ll know "DCC friendly" just means it passes track power through — the bridge is still turned by hand on the analog box. FalconDCC replaces that box: unplug the stock controller, plug into the turntable’s original cable, and all 36 positions come off your DCC command station with shortest-path rotation. No soldering, no drilling, fully reversible.
Also included: a phone/tablet/desktop web dashboard (no app, no cloud account), iTrain/JMRI automation, an open HTTP API + WebSocket, and two on-board buttons (long-press = 180° swing). Autoreversers and occupancy detection on the bridge feed are supported.
$89, currently $79 for a short time! Ships worldwide from falcondcc.com
Demo video:
Details/manual: falcondcc.com
Happy to answer any questions!
