Any Interest in rolling stock

[MikeGTW]

I'd be interested in the Great Northern, Northern Pacific, Alaska, flat cars, tank cars, and 2 cabeese in the photos. PM me a pricing info.

GN and Alaska yes Don't think I have any NP stuff but still looking

 

[MikeGTW]

I might be interested in some buildings too.

Buildings I have a few but shipping could be a little bit costly maybe ups for some of them would be cheaper

 

[MikeGTW]

Sorry been absent was moving a radial arm saw to different building tried to sell it I thought cheap ($200) one guy said it's too big and another wanted the table part to adjust up and down I don't think either one knew what a radial arm saw is even though had a photo
so I tweaked my knee or leg whatever it hurts same leg That got shattered when lady tried to do me in on my motorcycle at 50 mph
compound fracture of femur and shattered knee cap So brace back on a using crutch this sucks

Anyway for shipping a usps medium box is $17 Looks like I can get at least 8 or more in one so lets say $16 for the cars plus shipping
A large usps is $23 not sure what will fit in one maybe even a smaller building ??
I'm still making a list for what I've found so far

before pict and after still have a 3 x 24 and a 3 x 20 to take down but they can wait

 

[MikeGTW]

I forgot here's a link to one of my storage sites it is a pdf for the 40" cars so far



I'm making a new pdf file should have it tomorrow

 

[Smudge617]

Sorry been absent was moving a radial arm saw to different building tried to sell it I thought cheap ($200) one guy said it's too big and another wanted the table part to adjust up and down I don't think either one knew what a radial arm saw is even though had a photo
so I tweaked my knee or leg whatever it hurts same leg That got shattered when lady tried to do me in on my motorcycle at 50 mph
compound fracture of femur and shattered knee cap So brace back on a using crutch this sucks

Anyway for shipping a usps medium box is $17 Looks like I can get at least 8 or more in one so lets say $16 for the cars plus shipping
A large usps is $23 not sure what will fit in one maybe even a smaller building ??
I'm still making a list for what I've found so far

before pict and after still have a 3 x 24 and a 3 x 20 to take down but they can wait

WOW! I'm hoping your feeling a lot better soon, using a crutch is a pain (no pun intended) I have to use both of mine occasionally, and I hate it.

 

[ctclibby]

Sorry been absent was moving a radial arm saw to different building tried to sell it I thought cheap ($200) one guy said it's too big and another wanted the table part to adjust up and down I don't think either one knew what a radial arm saw is even though had a photo
so I tweaked my knee or leg whatever it hurts same leg That got shattered when lady tried to do me in on my motorcycle at 50 mph
compound fracture of femur and shattered knee cap So brace back on a using crutch this sucks

Anyway for shipping a usps medium box is $17 Looks like I can get at least 8 or more in one so lets say $16 for the cars plus shipping
A large usps is $23 not sure what will fit in one maybe even a smaller building ??
I'm still making a list for what I've found so far

before pict and after still have a 3 x 24 and a 3 x 20 to take down but they can wait

Mike: I would be interested in the large USPS with as many cars you can get into it. Looking for CP, GN or NP boxcars. Let me know via PM

Later

Todh

 

[MikeGTW]

Mike: I would be interested in the large USPS with as many cars you can get into it. Looking for CP, GN or NP boxcars. Let me know via PM

Later

Todh

I'm working on that list I made some things on it aren't adding up can't find a few on the list and started sorting the actual cars on a table in alphabetical order and found a couple cars not on the list Must be some very busy gremlins in my basement

 

[ctclibby]

Mike: Not a problem as I am not in a hurry. Basement gremlins - those something like computer gremlins? Have those. Anyway, do you happen to have any decaled for your railroad? Be interested in a few of those if so then they can stay alive on my railroad.

Later

todh

 

[MikeGTW]

The only stuff I ever got around to putting decals on were a few engines and caboose
I had Coal Mountain and Granger & Western

 

[MikeGTW]

I did do a what if logo just never had it done

 

[MikeGTW]

That second engine 4093 is all metal still not sure who made maybe Cary ?

Kind o like this one a Athearn engine A & B both powered and they will run at same speed as a normal BB geared engine

 

[Topherisme]

Mike, just saw this thread, hope I am not too late responding…
First and foremost, hope you heal up asap and can get off the crutches, been there and done that, no fun…
Interested in rolling stock, hopefully we can help each other out…

 

[MikeGTW]

Mike, just saw this thread, hope I am not too late responding…
First and foremost, hope you heal up asap and can get off the crutches, been there and done that, no fun…
Interested in rolling stock, hopefully we can help each other out…

Chris not to late I'm still correcting a few things on my lists couple cars on list I can't locate and a few that weren't on the list

 

[Marlin338MX]

Mike, I just saw your thread. What do you have for DC engines?

 

[MikeGTW]

Mike, I just saw your thread. What do you have for DC engines?

I have a few I think all the DCC ones are gone so most of the ones left are DC

I have my lists of cars done I think ??? Will work on engines next I think there's like 140 or so

Been kind of busy had my nephew go missing from a medical facility a week ago and so far no one can find him This was out in the country side location wise He has brain damage from a car accident years ago He still functions pretty good just can't drive or hold a job and has short term memory loss

The local sheriff is looking and had two tracking dogs out no luck so far they are using drones with heat sensing

It doesn't look good at all temps down to 30 I can only walk so much right now but am taking my Porlaris Sportsman 570 out to look

 

[Marlin338MX]

I have a few I think all the DCC ones are gone so most of the ones left are DC

I have my lists of cars done I think ??? Will work on engines next I think there's like 140 or so

Been kind of busy had my nephew go missing from a medical facility a week ago and so far no one can find him This was out in the country side location wise He has brain damage from a car accident years ago He still functions pretty good just can't drive or hold a job and has short term memory loss

The local sheriff is looking and had two tracking dogs out no luck so far they are using drones with heat sensing

It doesn't look good at all temps down to 30 I can only walk so much right now but am taking my Porlaris Sportsman 570 out to look

Thanks for the reply! Very sorry to hear about your nephew, I hope he is found soon and in good health.

No rush on the list of engines. I just started building my first true layout, using stuff my dad bought and stored more than 20 years ago. My last layout was a simple oval in 1977, HO scale, which was a blue box Athearn Amtrak train that I still have. I have about 20 engines from my dad's collection, and about half of them are steam locos. I'm looking for 1 or 2 diesel engines to add to my layout.

 

[Smudge617]

I have a few I think all the DCC ones are gone so most of the ones left are DC

I have my lists of cars done I think ??? Will work on engines next I think there's like 140 or so

Been kind of busy had my nephew go missing from a medical facility a week ago and so far no one can find him This was out in the country side location wise He has brain damage from a car accident years ago He still functions pretty good just can't drive or hold a job and has short term memory loss

The local sheriff is looking and had two tracking dogs out no luck so far they are using drones with heat sensing

It doesn't look good at all temps down to 30 I can only walk so much right now but am taking my Porlaris Sportsman 570 out to look

Sorry to hear about your nephew, hopefully you'll find him safe and well.

 

[MikeGTW]

Sorry to hear about your nephew, hopefully you'll find him safe and well.

Chris Thanks for saying that He has been missing since Nov 11 but they didn't inform anyone till the next day
I've been out on my four wheeler all most every day Had to find my rain gear for a couple of those
Here it is 13 days and nothing The two people with the tracking dogs and the sheriff think he was picked up by someone in a car since they both tracked him to the same spot then nothing So he could be miles away We may never know and that's the part that hurts not knowing

That Polaris four wheeler has it's own led display shows every thing The only thing it don't have is a heated seat


Had to stop in here for a minute
Mike