NYC_George
Well-Known Member
I added a crossover so the new main (the one on the right) could crossover to the old main (on left). I ran some passenger cars back and forth to make sure they make the switches and turns. The new main at this location will be a small 26 inch radius. I had to take off the fascia board because the 26" turn wouldn't fit. I'll have to add a little bench work here. The track in the middle is a open end passenger siding. I put plastic rail join insulators almost ever 3' in this area where a station will go. It should give me a lot of options when I set up the train control system. When everything is running smooth I'll add the ballast.
NYC_George
NYC_George
