Search results

ModelRailroadForums.com is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Whether you're a master model railroader or just getting started, you'll find something of interest here.


  1. L

    Proto 2000 GP38-2 Issues

    Glad that you have found a fix without too much angst. While I would have liked mine to be a solution I must give a couple of corrections to my posts. CV57 I assumed this was a commonly used CV but it turns out only(of the 2 makers) Digitrax uses it for user control. All I can find for NCE...
  2. L

    Proto 2000 GP38-2 Issues

    only if you want it fixed :-) EVEN in that case In 2009 I had a problem that displayed similar symptoms, had suggestions to "clean wheels", "defective decoder", "reset decoder", "lubricate" etc but nothing worked until I was put on track to BEMF. You can find my frustrations with it by...
  3. L

    Proto 2000 GP38-2 Issues

    Turn OFF Back EMF While it seems contrary to the description Back EMF may be an issue Verify that BACK EMF is off Set CV57=0
  4. L

    d nd error on Digitrax Zephyr

    KB362 Atlas DCC Decoder Programming Problem ("d nd") on DCS 50 from digitrax web site.... There are decoders now present in the market that do not draw enough current for the programming track to reliably detect that they are present, hence the error report of "d-nd". All you have to do...
  5. L

    Atlas Classic series

    TCS 1.5v support I can't speak about the A4X but the TCS A6X has pads for direct support/provision of 1.5volts and is well documented. ,,,, ken
  6. L

    Guess I am committed

    Good job but a little nit Good job but a little nit Your center 3 bays(2 bents) are unsound. The beams supporting them are insufficient for the load. The real world would have used a truss arrangement for the center spans and no partial bents. ,,,ken
  7. L

    Please help a newbie. I know what I want, just don't know "how."

    DCC Train Shuttle by Tam Valley Depot I would use DCC and this product. DCC Train Shuttle by Tam Valley Depot Use the Train Shuttle to automatically run a train back and forth for demos, breaking in locomotives or just for fun. Also makes a really simple way to run a DCC locomotive with...
  8. L

    TamValleyDepot Train Shuttle

    TamValleyDepot Train Shuttle Are there any alternatives to this direction reversing device? It is not a typical autoreverser but is a point to point automation device. thanks ,,, ken
  9. L

    Dont buy Athearn Genesis GP9

    Serious?? This is HO, right??? You must be kidding..... take care ,,, ken
  10. L

    Athearn Genesis F7 AB units ( DC mode )

    Reference point -Good deal For reference I got on Ebay a new HO Intermountain GN -EB F7A & F7B with factory DCC/sound for $155 USD delivered for the pair. Whenever I get a deal it spoils me and keeps me trying to better it. good hunting ,,, ken
  11. L

    Clear window plastic crazed/fogged

    thanks Thanks for the suggestions. I'll see how it works out ,,,, ken
  12. L

    Clear window plastic crazed/fogged

    Is there a method to polish/repair clear window plastic that is crazed/fogged due to misuse of glue?? thanks ,,, ken
  13. L

    Cannot get my virtual COM port to work with DecoderPro

    Nce jmri Obviously being an ITPro you have updated the driver for Win 8 and read the Prolific disclaimer about unsupported chip versions. Also why are you not using the NCE COM-USB adapter?? edit "NCE USB Interface, which is mostly for use with the PowerCab, not the Power Pro or Powerhouse...
  14. L

    Smoke Stack "Hats"

    Juice carton stacks These come on gable top cartons, 2 liter/quart in size with screw top. Brands are just about any including Minute maid & Oasis oj and others but are probably different in US. ,,,ken
  15. L

    Building the Pinnacle Creek Mining & Timber Co. RR

    #54 == 1.397mm == 0.055in #54 == 1.397mm == 0.055in almost exactly halfway between 1/16 & 3/64 real easy to look up online :) ,,, ken
  16. L

    Smoke Stack "Hats"

    Juice cartons with a screw top have a seal inside that when removed is a similar shape and size. ,,,, ken
  17. L

    First layout (HO) Help

    CV r/w is a must The entry level system will not R/Write CV's and invariably a novice will need to. Therefore NOT recomended. take care ,,, ken
  18. L

    The Canadian like you've never seen it before

    only $1000 Rico, if it was only $1000 here in BC I would have ordered one! ,,, ken
  19. L

    HO Bachmann DCC GP9 grab irons

    HO Bachmann DCC GP9 Do these units have separate grab irons or are they simply molded on?? thanks ,,, ken
  20. L

    New guy, new layout, looking for ideas / criticism

    One way reverse loop If one is good is two better?? The reverse connector functions only for counter clockwise travel and once a unit is travelling clockwise it would have to back through the reverse connector in order to return to cc travel. take care ,,, ken




Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here)


ModelRailroadForums.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

RailroadBookstore.com - An online railroad bookstore featuring a curated selection of new and used railroad books. Railroad pictorials, railroad history, steam locomotives, passenger trains, modern railroading. Hundreds of titles available, most at discount prices! We also have a video and children's book section.

ModelRailroadBookstore.com - An online model railroad bookstore featuring a curated selection of new and used books. Layout design, track plans, scenery and structure building, wiring, DCC, Tinplate, Toy Trains, Price Guides and more.

Top