Search results is a free Model Railroad Discussion Forum and photo gallery. We cover all scales and sizes of model railroads. Whether you're a master model railroader or just getting started, you'll find something of interest here.

  1. thaddeusthudpucker

    NCE decoders for RTR quickplug locos

    Since he is in Australia, I think it may be a bit difficult... Unless his profile info is old.
  2. thaddeusthudpucker

    NCE decoders for RTR quickplug locos

    There really is not a guaranteed one-size-fits-all for either thing. For the decoders, NCE D13SRP is the 8-pin version and D13SRJ is the 9-pin version. I like getting the J's and using the included wiring harness to get rid of the stock manufacturer board. On LED's I like Miniatronics Yeloglo...
  3. thaddeusthudpucker

    HO Bachmann 4-8-4 Northern Greyhound

    Can I send you mine to get this treatment done to it? =P Nice work, especially that backhead. I am impressed.
  4. thaddeusthudpucker

    I have a small dilemma.

    Nice track plan, I am just reading this thread for the first time tonight. If I might suggest a couple of things: Where the lower peninsula Industrial district is, put a tail track to enable switching without fouling the main. I like to leave one train running while working another. Same for...
  5. thaddeusthudpucker

    Diaphragms on HO passenger cars

    I have used three of these cars to make an approximation of the cars used at Mount Rainier Scenic Railroad (681, 901, 902). I have to agree, out of the box the spacing was horrendous. I used Sergent compatible shank couplers in Kadee boxes to shorten the gap way up. I eyeballed the position of...
  6. thaddeusthudpucker

    Does anyone share my view of not needing scenery?

    Your layout is whatever you want it to be. Do not let anyone tell you it is not good enough because you didn't do X or should have done Y. Having fun with it is what counts.
  7. thaddeusthudpucker

    HO scale speedometer

    Just put JMRI on an old desktop you have, it works pretty well with Windows XP, of which there are a bout a gajillion surplus machines all over the place. I am unsure of why you need to spend $400 for a JMRI machine, and JMRI itself is free.
  8. thaddeusthudpucker

    Looking for 10x16 ft. HO layout feedback

    Soldering to the rails provides a more reliable connection. With a little practice it is easily done.
  9. thaddeusthudpucker

    Looking for 10x16 ft. HO layout feedback

    I do believe the conventional way is to solder the feeders after the track is laid, lest you wind up with a feeder right on top of a cross member. Once the track is down a quick zap with a 1/8" drill bit right between the ties on the outside of the rail gets you the hole, I like to come around...
  10. thaddeusthudpucker

    TT scale railroad project

    Oh Oh Oh My mistake I thought we were talking about 1:450 T gauge not 1:120 TT scale... I knew a British TT modeler who said that the advantage was the presence of HO scale in the compactness of N.
  11. thaddeusthudpucker

    TT scale railroad project

    Have you considered a 3D printed town? At 1:450 stuff is tiny and does not eat up a ton of material which is how 3D printing is charged.
  12. thaddeusthudpucker

    Locomotive keeps loosing power dcc

    It's okay, my track is on the carpet at the moment too. Not everyone can have an actual layout all the time... Being that it is EZ track, it actually isn't that hard to make a terminal piece out of any hunk of track. Drill a 1/16" hole next to the outside of the rail and solder on a bit of...
  13. thaddeusthudpucker

    Locomotive keeps loosing power dcc

    Try adding another set of feeder wires at the furthest point away from your command station. Also try cleaning the wheels of your locomotives and your track, they do still oxidize when not running. Run a bright boy around the layout. Put a few drops of light oil onto a paper towel and run the...
  14. thaddeusthudpucker

    Milwaukee Road Passenger F-units

    What was the nature of the Proto breakdowns?
  15. thaddeusthudpucker

    Critique my layout

    What size steam locomotives are you planning on running? You will be able to run small to medium sized power, buy anything larger than a 4-6-4 is going to look too large for this layout, especially with 22" radius and #6 turnouts. Try rethinking with a minimum of 30. You will not have a lot of...
  16. thaddeusthudpucker

    Hi-Cube Hobbies

    The main 3D guy is slightly busy finishing out his school here in the next couple of days but he should have some time while he is on the Capitol Limited and Empire Builder on his way to Seattle. Once he is here the beatings will resume until the cab is finished.
  17. thaddeusthudpucker

    Looking for a club in Atlanta, GA

    Hello guys I am in need of a club in the Atlanta area, preferably near Tucker, that I can come play with my HO trains at... Also, any leads on good shops are welcome. If you have a layout and wouldn't mind a guest this weekend to help clean track or whatever slave tasks you have in mind...
  18. thaddeusthudpucker

    The Admiral Cab

    That is a good question. I'm inclined to say Blue-box, because those will be the most readily available. I will ask Adam. The cab itself should fit on anything as long as you file things down and make them fit nicely.
  19. thaddeusthudpucker

    The Admiral Cab

    [This space reserved for progress reports/Status updates]
  20. thaddeusthudpucker

    The Admiral Cab

    Ladies and Gentlemen Our original plan for the Admiral Cabs, and indeed anything else we do, is not viable due to the lack of quality in the Shapeways prints. Thus, we will not be going that route. Instead, we will be going a route that will ensure a higher quality final product and allow...

Affiliate Disclosure: We may receive a commision from some of the links and ads shown on this website (Learn More Here) is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to - An online railroad bookstore featuring a curated selection of new and used railroad books. Railroad pictorials, railroad history, steam locomotives, passenger trains, modern railroading. Hundreds of titles available, most at discount prices! We also have a video and children's book section. - An online model railroad bookstore featuring a curated selection of new and used books. Layout design, track plans, scenery and structure building, wiring, DCC, Tinplate, Toy Trains, Price Guides and more.