You don't think Santa has been delivering trains every Christmas for all these years, and never used his Christmas magic to take a ride on a model train once in a while?
HO diorama, Walthers C&O caboose, Prieser Santa, Woodland Scenics Just Plug in building lights and cars.
I have a few old, mid 60s to early 80s, brass steam locos that I would like to repower with can motors and then set up for DCC.
Can anyone here recommend a good source of can motors?
Thanks
Jim
Some summer morning in the early 1910s, crossing the Coal River, slowing for a stop in St. Albans, WV. You can imagine the excited kids waiting to see the steam engine, and the excited grown-ups waiting to see who is getting off the train.
HO scale, aged in Paint Shop Pro.
Took an old friend to the club and ran it for the first time in about 15 years. This PFM C & O 2-8-4 is my first brass loco. It was 1981 and I was a young Sergeant in the Army stationed in W. Germany, at the time, that $250. was a hard nut to crack, but I've never been sorry.
A small diorama, 18 X 24 inches, created for Christmas card photos. The church is scratch built, the gas station is an old Woodland Scenics kit. The backdrop is a photo of snow covered hills in WV. The scene is lit with a blue flood light, with Christmas lights, smoke and moon photoshopped in.
The clear, quiet Christmas Eve is disturbed briefly as an ABA set of C&O F-7s rumble by, the crew anxious to get home to their families. Folks are arriving for the annual children's Christmas Pageant at the Episcopal Church and across the street Bill is pumping his last tank of gas for the...
I have been doing some simple kit bashing to upgrade the looks of some old Athearn baggage cars, to represent cars rebuilt by the C&O in the 1950s.
The cars are close on length, but the doors are too far apart to be C&O cars. However, the main spotting feature for these cars is the newer...
I have a Walthers Sperry car I am planning to add a decoder to and was thinking of going sound. Any recommendations on something that might sound like an old Sperry car? I didn't see anything specific on the Soundtraxx site, except possibly the "Baldwin and other Diesels" since it includes...
I haven't purchased an Athearn passenger car in many years, so this may be a question that has been asked and answered before.
A couple of members of my club purchased several new Athearn passenger cars. They are the same cars Athearn has been selling for decades, but of course now they are...
I picked up some Athearn axle gears to replace the gears in a couple of PROTO GP9s I have with the common clunk, clunk, clunk sound of cracked gears.
The only Athearn gears I find are sold in sets of six and labeled for SD locomotives. My question is, are they the same gears used in Athearn...
I got a couple on line, about $4.00 each. I'm sure they are not actual OEM. I am however pleasantly surprised. Plenty of volume and very clear. A little weak in the bass department, but overall, pretty darn good. At about 5mm thick they are easy to find room for.
I'll be operating them at...
I am putting a Tsunami decoder in an old Athearn F7. I was thinking of using the iPhone I6 speaker that a lot of folks have used with sound decoders.
Any pros or cons you can share? Can the little plastic appendage be removed if needed?
JB
I haven't built anything model train related in over a year, it feels good to be back at it. Still a work in progress, converting a Walthers Al's Victory station into an Esso station. Roof sign is 3D printed based on photos of Esso stations in the 40s and 50s. Using Woodland Scenics LEDs to...
I'm not tech savvy enough to offer any real insight. However, I am also a member over at RCGroups.com. Their forum is vey similar to this and they don't seem to have any issues, so you may want to see what they are using. Sorry I'm not more help.
Jim
I was going through old stuff in the basement and ran across a couple of Athearn 40 ft chemical tank car kits. I couldn’t remember what I got them for and didn’t have current any planes for the kits. I remembered a modeling buddy saying he wished someone would make a model of the tank cars...
Sorry if this is a newb question. I installed a TSU-1000 in a brass steam loco. The sound and operation is good but I have two issues I need to work through.
Apparently my motor leads are reversed as the loco ran reverse in forward. Not a big deal I changed that in the basic configuration...