Hi Tom- read on the forum here someone heated up a screwdriver and used that to make the dents.Finished with pulp cars for a while. We have gondolas!
I finished up 2 duplicate numbered CN’s 63’ mill gons from Walthers. This was my great buy that I was so proud of that I didn’t buy the numbers of cars I have. It was very deflating when I figured out was wrong. Anyway, they are lightly weathered and on the layout.
View attachment 142794
As I finished the Testors dull cote the mail delivery arrived with 2 more. A CN with a number I don’t have and a WC gondola, also the Walthers 63’ mill gondola with drop down ends. They are on the turntable after getting a light base coat of Tamiya Hull Red
View attachment 142799View attachment 142800
Funny thing. I cannot find these in the Walthers online catalog including when I look for retired pieces. The box says it’s Walthers RTR series. The all are in need of 36” steel wheels and the Kadee #148 whisker coupler I use.
Tomorrow for that exchange.
A FB friend asked if I would do the dents and dings these cars normally have. The prototype pictures I am working from do not have the big bulges and dents I see so commonly done in You Tube videos. I did start experimenting though with a soldering iopron on one side of an old Athearn BB. Tomorrow I will use the heat gun on low and try that as a comparison
TomO
Thanks Dave. I tried to use my heat gun on low a few months ago and never got the hang of isolated melting. I have been experimenting with the heat gun again and the soldering iron the last couple days. Still not enough control for either one of the methods for me at this timeHi Tom- read on the forum here someone heated up a screwdriver and used that to make the dents.
Maybe used the same torch they started the fire with
The most dented ones I have seen were in mow service. I'll try to get a picThanks Dave. I tried to use my heat gun on low a few months ago and never got the hang of isolated melting. I have been experimenting with the heat gun again and the soldering iron the last couple days. Still not enough control for either one of the methods for me at this time
Geez I do have a propane torch and way too many screw drivers! An experiment now for outside though as I disassembled the paint booth exhaust system about an hour ago.
I do need to dig a little deeper online though for dented gondolas. For the current batch on the work table I am using these pictures as my weather along guides. No dents that are real noticeable, so my experimenting maybe for naught
All pictures are credited but the last 4 which were sent to me but also used with permission personally from the photographer.
View attachment 142835View attachment 142836View attachment 142837View attachment 142838View attachment 142839View attachment 142840View attachment 142841View attachment 142842View attachment 142843View attachment 142844
TomO
Thank you Dave. Even the pictures you posted the bulges and dents aren’t real obvious like the 1st MOW gon.The most dented ones I have seen were in mow service. I'll try to get a pic
Here are a couple:
View attachment 142845
Alright, that is a little overboard. I am sure they don't take that one very fast.
View attachment 142846
The sides are a little puffy
View attachment 142847
I included this one because of your location.
Did not find the pic I was looking for but some more ideas, maybe
That looks great
Lee, no issue come aboard. 1st off I am Scale blind and second weathering in any scale is still weathering. I will try to learn something. Love the flat cars and that Trailer Service load is awesome. Brings back memories of my youth in Chicago’s southwest side. NW had a trailer yard that had trailers that looked like what you are showing. Late 60’s to 76 is my remembrances.Tom. Great idea for a Thread hope you don’t mind some of my O Scale Weathering. I learned how to weather many years ago from the Millitary Modelers I still build Millitary stuff but not as much. I’ve done several Lionel PS4 Piggyback Flatcars and have quite a few left to do here are some that I’ve done a couple years ago. I use Mig. Washes and other different pigment powders. View attachment 143058View attachment 143059View attachment 143060View attachment 143061View attachment 143062View attachment 143063View attachment 143064View attachment 143065View attachment 143066View attachment 143067
Tom. Thanks for the complement and sharing that memory I never got to see any of that stuff I was to young for that era no Piggybacks ran trough our little town either. I bet you seen some great stuff from your part of town. Glad you don’t see scale me either I enjoy the two that I model in. The tip about MiG. Washes I’ve learned especially the dark colors is on certain Olive Drabs it darkens it too much turns it brown I would test them out before using them don’t do what I did apply it the have to re paint again. They dry fast and there great for a grime pudding effect in corners and grime streaking. I’ll post some more of my O scale Piggybacks tomorrow. I hope this helps.Lee, no issue come aboard. 1st off I am Scale blind and second weathering in any scale is still weathering. I will try to learn something. Love the flat cars and that Trailer Service load is awesome. Brings back memories of my youth in Chicago’s southwest side. NW had a trailer yard that had trailers that looked like what you are showing. Late 60’s to 76 is my remembrances.
I have not used the Mig washes yet but have a couple. Are they difficult to work with? Any tricks or must have to’s before I venture into those? I use Pan Pastels and I used to use a black ink dilution for panel lines.
Thank you
TomO
Thanks for the tip Gregg. I bought one time a big bag of damaged HO plastic Automobiles that look like you just described they look so real all smashed up. I’ll dig them out and post them who done these Automobiles did a great job on them.The danger in creating dents is the final effects look like a soldering iron was used to do the denting.
One method that works well for many modelers is to use a high watt soldering gun and a piece of thin steel plate or even a section of bent aluminum can and hold the steel against the side or near the top of the gon and press the heated soldering gun against the steel plate. As the plastic of the gon begins to melt you and shape the damage in many different ways.
I found that bending the metal in a "U" shape work fine for me. Different sizes of the pieces of metal works good for a variety of damaged areas.
Like weathering, you don't need a lot of damage to get the message across that the gondola has seen better days.
Have fun with your project.
Greg
I understand I like both HO and O. The thing about a bigger scale is when weathering or building you have to put more effort in it to make it look very convincing. You can hide more mistakes and less effort in the smaller scales. That’s what I’ve found out anyway. Thanks for the complement.i am not really into 3-rail but those look great, realism is a plus in any scale
That is well written. Realism is a plus in any scale.i am not really into 3-rail but those look great, realism is a plus in any scale
The biggest thing so far weathered is practicing on an old Athearn BB 86’ boxcar from the early 70’. That was a big canvas to work on, I can only imagine about O scale.I understand I like both HO and O. The thing about a bigger scale is when weathering or building you have to put more effort in it to make it look very convincing. You can hide more mistakes and less effort in the smaller scales. That’s what I’ve found out anyway. Thanks for the complement.